Schneider Electric

Schneider Electric BMXDDM16025H discrete I/O module X80 - 8 I - 24 V DC - 8 O - relay - severe

(No reviews yet) Write a Review
SKU:
BMXDDM16025H
MPN:
BMXDDM16025H
Condition:
New
Dc Typical Filtering Time:
4 ms
Electrical Durability:
AC-14 100000 cycles 120 VA 240 V 70-70°C 0.7 ) || AC-14 100000 cycles 150 VA 200 V 70-70°C 0.7 ) || AC-14 100000 cycles 240 VA 240 V -25-60°C 0.7 ) || AC-14 100000 cycles 300 VA 200 V -25-60°C 0.7 ) || AC-15 100000 cycles 100 VA 200 V 70-70°C 0.35 )
Mercury Free:
Yes
Warranty:
18 months
Current State 1 Guaranteed:
>= 2 mA
Status Led:
1 LED (Green) module operating (RUN) || 1 LED per channel (Green) channel diagnostic || 1 LED (Red) module error (ERR) || 1 LED (Red) module I/O
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Insulation Resistance:
> 10 MOhm 500 V DC
Discrete Input Voltage:
24 V DC positive
Voltage Detection Threshold:
< 14 V DC sensor fault || > 18 V DC sensor OK
Net Weight:
0.135 kg
Discrete Input Number:
8
Discrete Output Number:
8
Switching Frequency:
1 Hz
Current State 0 Guaranteed:
<= 1.5 mA
Input Impedance:
6800 Ohm
Directives:
2014/35/EU - low voltage directive || 2014/30/EU - electromagnetic compatibility
Environmental Characteristic:
gas resistant class Gx || gas resistant class 3C4 || dust resistant class 3S4 || sand resistant class 3S4 || salt resistant level 2 || mold growth resistant class 3B2 || fungal spore resistant class 3B2
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Input Compatibility:
with 2-wire/3-wire proximity sensors IEC 60947-5-2 || with 2-wire/3-wire proximity sensors IEC 61131-2 type 3
Power Dissipation In W:
3.1 W
Paralleling Of Inputs:
no
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Circularity Profile:
ENVEOLI2311046EN
Protection Type:
1 external fuse per group of input channel 0.5 A fast blow || reverse polarity protection on input || 1 external fuse per output channel or group of output channel fast blow
Country of Origin:
France
Protective Treatment:
conformal coating
Ambient Air Temperature For Storage:
-40-85°C
Operating Altitude:
0...6561.68 ft (0...2000 m) || 2000...5000 m with derating factor
Typical Current Consumption:
79 mA 3.3 V DC
Discrete Output Voltage:
24 V 19...30 V DC || 24...240 V 19...264 V AC
Discrete Output Current:
2000 mA
Range Of Product:
Modicon X80
Dc Maximum Filtering Time:
7 ms
Response Time On Output:
<= 8 ms deactivation || <= 10 ms activation
Discrete Output Type:
relay
Mtbf Reliability:
940000 H
Voltage Range:
19...30 V 60°C || 21.1...29.0 V 70°C
Minimum Switching Current:
1 mA 5 V DC
Ip Degree Of Protection:
IP20
Environmental Disclosure:
ENVPEP2311046EN
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Maximum Switching Voltage:
125 V DC || 264 V AC
Shock Resistance:
30 gn
Dielectric Strength:
1500 V AC 50/60 Hz 1 minute, primary/secondary || 2830 V AC 50/60 Hz 1 minute, output relay || 500 V DC 1 minute, between group of I/O
Product Specific Application:
for severe environments
Input Type:
current sink (logic positive)
China Rohs Regulation:
X
Weight:
0.135 kg
Product Or Component Type:
discrete I/O module
$515.00