Schneider Electric

Schneider Electric BMXDDM3202K discrete mixed IO module, Modicon X80, 16 inputs, 16 outputs, 24V DC positive

(No reviews yet) Write a Review

Write a Review

Schneider Electric

Schneider Electric BMXDDM3202K discrete mixed IO module, Modicon X80, 16 inputs, 16 outputs, 24V DC positive

Rating Required Select Rating 1 star (worst) 2 stars 3 stars (average) 4 stars 5 stars (best)

Name

Email Required

Review Subject Required

Comments Required

SKU:

BMXDDM3202K

UPC:

MPN:

BMXDDM3202K

Condition:

New

Dc Maximum Filtering Time:

7 ms

Environmental Disclosure:

ENVPEP2311046EN

Input Impedance:

9600 Ohm

Voltage Detection Threshold:

< 14 V DC preactuator fault || < 14 V DC sensor fault || > 18 V DC preactuator OK || > 18 V DC sensor OK

Protection Type:

1 external fuse per group of input channel 0.5 A fast blow || overvoltage protection on output || reverse polarity protection on input || reverse polarity protection on output

Country of Origin:

France

Output Overvoltage Protection:

with transil diode

Directives:

2014/35/EU - low voltage directive || 2014/30/EU - electromagnetic compatibility

Eu Rohs Directive:

Pro-active compliance (Product out of EU RoHS legal scope)

Maximum Tungsten Load:

1.2 W

China Rohs Regulation:

X

Discrete Input Current:

2.5 mA

Discrete Output Type:

solid state

Current State 1 Guaranteed:

>= 2 mA

Insulation Resistance:

> 10 MOhm 500 V DC

Dielectric Strength:

1500 V AC 50/60 Hz 1 minute, output/ground || 1500 V AC 50/60 Hz 1 minute, output/internal logic || 1500 V AC 50/60 Hz 1 minute, primary/secondary || 500 V DC 1 minute, between group of inputs and outputs

Current Consumption:

<= 104 mA 24 V DC || <= 166 mA 3.3 V DC

Switching Frequency:

0.5/LI² Hz

Product Or Component Type:

discrete I/O module

Discrete Input Voltage:

24 V DC positive

Current Per Channel:

0.125 A

Load Impedance Ohmic:

<= 220 Ohm

Maximum Overload Time:

15 ms

Net Weight:

0.11 kg

Maximum Leakage Current:

0.1 mA at state 0

Voltage Range:

19...30 V

Discrete Output Current:

0.1 A

Status Led:

1 LED (Green) module operating (RUN) || 1 LED per channel (Green) channel diagnostic || 1 LED (Red) module error (ERR) || 1 LED (Red) module I/O

Warranty:

18 months

Ip Degree Of Protection:

IP20

Mercury Free:

Yes

Input Compatibility:

with 2-wire/3-wire proximity sensors IEC 60947-5-2 || with 2-wire/3-wire proximity sensors IEC 61131-2 Type 1

Maximum Current Per Module:

3.2 A

Discrete Input Number:

16

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

Range Of Product:

Modicon X80

California Proposition 65:

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Typical Current Consumption:

69 mA 24 V DC || 125 mA 3.3 V DC

Relative Humidity:

5-95 % 55-55°C without condensation

Weight:

0.11 kg

Discrete Output Number:

16

Vibration Resistance:

3 gn

Shock Resistance:

30 gn

Ambient Air Temperature For Storage:

-40-85°C

Output Overload Protection:

with electronic circuit breaker 0.125 A < Id < 0.185 A || with current limiter

Reverse Polarity Protection:

reverse mounted diode

Maximum Voltage Drop:

<1.5 V at state 1

Operating Altitude:

0...6561.68 ft (0...2000 m) || 2000...5000 m with derating factor

Input Type:

current sink (logic positive)

Paralleling Of Outputs:

yes : 3 maximum