Schneider Electric

Schneider Electric BMXDDO1602H discrete output module, Modicon X80, 16 transistor outputs, 24V DC positive, for severe environments

(No reviews yet) Write a Review
SKU:
BMXDDO1602H
MPN:
BMXDDO1602H
Condition:
New
Ambient Air Temperature For Operation:
-25-70°C
Maximum Voltage Drop:
<1.2 V at state 1
Load Impedance Ohmic:
> 48 Ohm
Protection Type:
external fuse reverse polarity protection || short-circuit protection || overload protection || overvoltage protection
Status Led:
1 LED (Green) module operating (RUN) || 1 LED per channel (Green) channel diagnostic || 1 LED (Red) module error (ERR) || 1 LED (Red) module I/O
Product Or Component Type:
discrete output module
Typical Current Consumption:
79 mA 3.3 V DC
Power Dissipation In W:
4 W
Dielectric Strength:
1500 V AC 50/60 Hz 1 minute, output/ground || 1500 V AC 50/60 Hz 1 minute, output/internal logic
Discrete Output Logic:
positive
Range Of Product:
Modicon X80
Environmental Disclosure:
ENVPEP2311046EN
Current Per Channel:
0.625 A
Country of Origin:
Indonesia
Discrete Output Voltage:
24 V 19...30 V DC
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Insulation Resistance:
> 10 MOhm 500 V DC
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Switching Frequency:
0.5/LI² Hz
Directives:
2014/35/EU - low voltage directive || 2014/30/EU - electromagnetic compatibility
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Circularity Profile:
ENVEOLI2311046EN
Net Weight:
0.12 kg
Vibration Resistance:
3 gn
Response Time On Output:
1.2 ms
Ip Degree Of Protection:
IP20
Output Overload Protection:
with electronic circuit breaker 1.5 In < Id < 2 In || with current limiter
China Rohs Regulation:
X
Relative Humidity:
5-95 % 55-55°C without condensation
Discrete Output Type:
solid state
Protective Treatment:
conformal coating
Shock Resistance:
30 gn
Voltage Detection Threshold:
< 14 V DC preactuator fault || > 18 V DC preactuator at state 0
Environmental Characteristic:
gas resistant class Gx || gas resistant class 3C4 || dust resistant class 3S4 || sand resistant class 3S4 || salt resistant level 2 || mold growth resistant class 3B2 || fungal spore resistant class 3B2
Maximum Tungsten Load:
6 W
Product Specific Application:
for severe environments
Maximum Current Per Module:
0.416666666666667
Weight:
0.12 kg
Reverse Polarity Protection:
reverse mounted diode
Output Short-Circuit Protection:
with 2 A external fuse
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Discrete Output Current:
0.5 A
Operating Altitude:
0...6561.68 ft (0...2000 m) || 2000...5000 m with derating factor
Discrete Output Number:
16 EN/IEC 61131-2
Output Overvoltage Protection:
with transil diode
Mercury Free:
Yes
Ambient Air Temperature For Storage:
-40-85°C
Mtbf Reliability:
410000 H
Warranty:
18 months
Maximum Leakage Current:
0.5 mA at state 0
$410.00

Description

This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This discrete output module has 16 outputs with sink (positive) logic. It is a discrete output module with an output voltage of 24V, 19V DC to 30V DC, a maximum power dissipation of 4W, a typical current consumption 79mA at 3.3V DC and 0.6A current per channel. This ruggedized product can be used in more severe environments, and operate in an extended temperature range, from -25°C to +70°C. Protection types are reverse polarity protection, external short-circuit protection, overload protection and overvoltage protection. It offers 392285 hours of MTBF. It is an IP20 rated product. It weighs 0.12kg. It is suitable for severe environments, medium to large process applications. This product is certified by IEC-Ex, ATEX, EAC, Merchant Navy, CSA, RCM, CE and UL. It meets EN 61131-2, EN 61000-6-4, EN 61000-6-2 and EN 61010-2-201 standards. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock, and unique training for different Programmable Automation Controllers (PAC).
View AllClose