Schneider Electric BMXDRC0805 discrete output module, Modicon X80, 8 NO or NC relay outputs, 24 to 240V AC, 24 to 125V DC
SKU:
BMXDRC0805
UPC:
MPN:
BMXDRC0805
Condition:
New
China Rohs Regulation:
X
Operating Altitude:
0...6561.68 ft (0...2000 m) || 2000...5000 m with derating factor
Vibration Resistance:
3 gn
Response Time On Output:
<= 10 ms activation || <= 13 ms deactivation
Shock Resistance:
30 gn
Output Overload Protection:
use 1 fast blow fuse per channel or group of channel
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Network Frequency Limits:
47-63 Hz
[Ith] Conventional Free Air Thermal Current:
4 A 40°C || 3 A 50°C || 2 A 60°C
Output Short-Circuit Protection:
use 1 fast blow fuse per channel or group of channel
Environmental Disclosure:
ENVPEP2402023EN
Discrete Output Number:
8 EN/IEC 61131-2
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Voltage Range:
5...150 V || 19...264 V
Mercury Free:
Yes
Ip Degree Of Protection:
IP20
Electrical Durability:
AC-12 200000 cycles 48 VA 24 V 0-60°C || AC-12 300000 cycles 48 VA 48 V 0-60°C || AC-12 150000 cycles 96 VA 48 V 0-60°C || AC-12 300000 cycles 110 VA 100...120 V 0-60°C || AC-12 150000 cycles 220 VA 100...120 V 0-60°C || AC-12 300000 cycles 220 VA 20
Range Of Product:
Modicon X80
Discrete Output Logic:
positive or negative
Dielectric Strength:
1780 V AC 50/60 Hz 1 min
Protection Type:
external short-circuit protection || external overload protection || external overvoltage protection, inductive AC || external overvoltage protection, inductive DC
Mtbf Reliability:
2650000 H
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Relative Humidity:
0-95 % 0-60°C without condensation
Country of Origin:
France
Insulation Resistance:
> 10 MOhm 500 V DC
Status Led:
1 LED (Green) RUN || 1 LED per channel (Green) channel diagnostic || 1 LED (Red) ERR || 1 LED (Red) I/O
Weight:
0.189 kg
Typical Current Consumption:
40 mA 3.3 V DC || 101 mA 24 V DC
Net Weight:
0.189 kg
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Minimum Switching Current:
10 mA 5 V DC
Circularity Profile:
ENVEOLI2402023EN
Electrical Connection:
40 ways terminal block
Output Overvoltage Protection:
use discharge diode on each output DC || use RC circuit on each output AC || use ZNO surge limiter on each output AC
Discrete Output Voltage:
5...125 V 5...150 V DC || 24...240 V 19...264 V AC
This discrete output module is part of the Modicon X80 modules. It has 16 relay non protected outputs, 24V DC / 24V to 240V AC. This module is connected via 20-way removable terminal block. It...
This product is part of the Modicon X80 range, a common platform of modules for Modicon M580 and M340 Programmable Automation Controllers (PAC). This discrete output module has 16 relay outputs. It...
