Schneider Electric

Schneider Electric BMXSDI1602 safety discrete input module, Modicon X80, 16 inputs, 24V DC positive

(No reviews yet) Write a Review
SKU:
BMXSDI1602
MPN:
BMXSDI1602
Condition:
New
Mtbf Reliability:
265000 H
Operating Altitude:
0...6561.68 ft (0...2000 m) || 2000...5000 m with derating factor
Relative Humidity:
5-95 % 55-55°C without condensation
Typical Current Consumption:
256 mA 3.3 V DC || 100 mA 24 V
Voltage Detection Threshold:
< 14 V DC sensor fault || > 18 V DC sensor OK
Vibration Resistance:
3 gn
Protective Treatment:
conformal coating
Input Type:
current sink (logic positive)
Net Weight:
0.115 kg
Ambient Air Temperature For Operation:
-25-60°C
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Discrete Input Voltage:
24 V DC positive
Voltage Range:
19...30 V
Dc Maximum Filtering Time:
6 ms
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation:
X
Country of Origin:
France
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Discrete Input Number:
16
Current State 1 Guaranteed:
>= 2 mA
Product Or Component Type:
discrete input module
Status Led:
1 LED (Green) module operating (RUN) || 1 LED per channel (Green) channel diagnostic || 1 LED (Red) module error (ERR) || 1 LED (Red) module I/O
Mercury Free:
Yes
Ambient Air Temperature For Storage:
-40-85°C
Input Compatibility:
with 2-wire/3-wire proximity sensors IEC 60947-5-2
Input Impedance:
7500 Ohm
Discrete Input Type:
not isolated
Environmental Characteristic:
gas resistant class Gx || gas resistant class 3C4 || dust resistant class 3S4 || sand resistant class 3S4 || salt resistant level 2 || mold growth resistant class 3B2 || fungal spore resistant class 3B2
Range Of Product:
Modicon X80
Shock Resistance:
15 gn
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Protection Type:
reverse polarity protection || external overload protection 0.5 A fast blow
Paralleling Of Inputs:
yes
Dielectric Strength:
1500 V AC 50/60 Hz 1 minute, primary/secondary
Weight:
0.115 kg
Current State 0 Guaranteed:
<= 1.5 mA
Insulation Resistance:
> 10 MOhm 500 V DC
Power Dissipation In W:
3.57 W
Ip Degree Of Protection:
IP20
Discrete Input Current:
3.2 mA
Dc Typical Filtering Time:
6 ms
$1,750.00

Description

This cord set is part of the Modicon X80 range, an offer of common modules and installation accessories for M580 and M340 automation platforms. This discrete input module offers 16 inputs with positive discrete input logic. It is a module with discrete input voltage of 24V DC with current sink positive logic. It is the Modicon digital input module dedicated to M580 safety systems. It features 16 Type 3 inputs, in two groups of 8 non-isolated inputs. It is an IP20 rated product. It weighs 0.115kg. It is suitable for safety most demanding applications. This product is certified by CE and UL, and also by ATEX and IECEx for use in explosive atmospheres. It complies up to SIL 3, Category 4, PLd. It is to be used with BMXFTB2000 caged terminal block. The I/O module height is larger than the height of a rack (Ethernet or X-bus) and should be considered before installing the rack. It can be installed either in a local or a remote rack. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock. The Modicon X80 range is one important part of EcoStruxure Plant, an open, flexible, reliable, sustainable, safe and secure architecture.
View AllClose

Related Products

Related Products