Schneider Electric

Schneider Electric BMXSDO0802 safety discrete output module, Modicon X80, 8 outputs, 24V DC positive

(No reviews yet) Write a Review
SKU:
BMXSDO0802
MPN:
BMXSDO0802
Condition:
New
Output Overload Protection:
with current limiter || with electronic circuit breaker 1.5 In < Id < 2 In
Discrete Output Type:
solid state || not isolated
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Weight:
0.12 kg
Vibration Resistance:
3 gn
Mtbf Reliability:
383000 H
Paralleling Of Outputs:
yes : 2 maximum
Maximum Current Per Module:
0.416666666666667
Ambient Air Temperature For Storage:
-40-85°C
Power Dissipation In W:
4.4 W
Maximum Tungsten Load:
6 W
Insulation Resistance:
> 10 MOhm 500 V DC
Reverse Polarity Protection:
reverse mounted diode
Protective Treatment:
conformal coating
Load Impedance Ohmic:
>= 48 Ohm
Output Short-Circuit Protection:
with 2 A external fuse
Shock Resistance:
15 gn
Country of Origin:
United States
Ambient Air Temperature For Operation:
-25-60°C
Discrete Output Number:
8 EN/IEC 61131-2
Discrete Output Logic:
positive
Maximum Leakage Current:
0.5 mA at state 0
Range Of Product:
Modicon X80
Status Led:
1 LED (Green) module operating (RUN) || 1 LED per channel (Green) channel diagnostic || 1 LED (Red) module error (ERR) || 1 LED (Red) module I/O
Relative Humidity:
5-95 % 55-55°C without condensation
Discrete Output Voltage:
24 V 19...30 V DC
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Environmental Characteristic:
gas resistant class Gx || gas resistant class 3C4 || dust resistant class 3S4 || sand resistant class 3S4 || salt resistant level 2 || mold growth resistant class 3B2 || fungal spore resistant class 3B2
Dielectric Strength:
1500 V AC 50/60 Hz 1 minute, output/ground || 1500 V AC 50/60 Hz 1 minute, output/internal logic
China Rohs Regulation:
X
Protection Type:
reverse polarity protection || overload protection || overvoltage protection || short-circuit protection
Product Or Component Type:
discrete output module
Mercury Free:
Yes
Discrete Output Current:
0.5 A
Maximum Voltage Drop:
<1.2 V at state 1
Output Overvoltage Protection:
with transil diode
Net Weight:
0.12 kg
Typical Current Consumption:
264 mA 3.3 V DC || 15 mA 24 V
Current Per Channel:
0.625 A
Switching Frequency:
0.5/LI² Hz
Output Compatibility:
not IEC 61131-2 DC input || IEC 61131-2 type 3 DC input
Operating Altitude:
0...6561.68 ft (0...2000 m) || 2000...5000 m with derating factor
Voltage Detection Threshold:
< 14 V DC sensor fault || > 18 V DC sensor OK
Response Time On Output:
1.2 ms
Eu Rohs Directive:
Pro-active compliance (Product out of EU RoHS legal scope)
Ip Degree Of Protection:
IP20
$1,350.00

Description

This cord set is part of the Modicon X80 range, an offer of common modules and installation accessories for M580 and M340 automation platforms. This discrete output module offers 8 positive discrete output logic. It offers discrete output voltage ranges from 19V DC to 30V DC, 24V DC with solid state and not isolated discrete output. It is an IP20 rated product. It weighs 0.12kg. It is to be used with BMXFTB2010 screw clamp type terminal block. Modicon X80 consists in a compatible modules common platform that reduce maintenance and training costs with same spare parts in stock. The Modicon X80 range is one important part of EcoStruxure Plant, an open, flexible, reliable, sustainable, safe and secure architecture.
View AllClose