Schneider Electric

Schneider Electric EVCP200D5IP00 Electronic VAR control - 200 A 380..480 V AC - IP00 enclosure

(No reviews yet) Write a Review
SKU:
EVCP200D5IP00
MPN:
EVCP200D5IP00
Condition:
New
Input Frequency:
50/60 Hz +/- 3 % auto-sensing
Reach Free Of Svhc:
Yes
Reactive Power Rating:
166 kvar 480 V AC 50/60 Hz
Eu Rohs Directive:
Compliant
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Electromagnetic Compatibility:
conducted EMC, class A EN 61000-6-4
Environmental Characteristic:
operating 3C2 IEC 60721-3-3 || operating 3S2 IEC 60721-3-3 || storage 3C3 IEC 60721-3-3 || storage 3S3 IEC 60721-3-3
Relative Humidity:
0-95 %
Network Rated Voltage:
380-480 V AC
Impregnation Material:
conformal coated
Color:
Light gray RAL 7035)
Mounting Location:
indoor
Operating Altitude:
<= 3280.84 ft (1000 m) 1 % per 100 m
Nominal Output Current:
200 A
Maximum Permissible Voltage:
1.1 x Un
Toxic Heavy Metal Free:
Yes
Function Available:
rear plenum with forced ventilation for high heat flow
Mercury Free:
Yes
Reach Regulation:
Free of Substances of Very High Concern above the threshold
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Ambient Air Temperature For Operation:
0-40°C || 0-50°C maximum with current derating of 2 % per°C
Protection Type:
without protection
Weight:
175 kg
Ambient Air Temperature For Storage:
-20-60°C
Operating Mode:
mains current balancing || volt-var support || power factor correction
Product Name:
AccuSine PFV+
Range Of Product:
AccuSine
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Poles Description:
3P
Product Certifications:
cULus || ABS || CE || DNV-GL || RCM
Product Or Component Type:
electronic VAR controller
Depth:
438 mm
Wiring Mode:
3 or 4 wires
Accessibility For Operation:
front
Location Of Connection:
bottom
Ip Degree Of Protection:
IP00
Standards:
EN 61000-6-4 || CSA C22.2 No 14 || EN 60439-1 || UL 508 || CSA C22.2 No 60947-1-07 || UL 60947-1
Enclosure Mounting:
wall mounted
Net Weight:
175 kg
Rohs Exemption Information:
Yes
Warranty:
18 months
$106,891.46

Description

This hardware is an active power correction solution, from AccuSine familly, to help stabilize electrical networks by providing swift power factor correction and load balancing. It is specifically designed for harsh electrical conditions, for heavy industrial applications including mission critical environments. This version is UL Type OPEN, or ingress protection IP00, and can be connected on Low Voltage networks rated 380 Volt to 480 Volt. It is specified for a standard Root Mean Square output current rating of 200 Amps. The enclosure is wall mounted, allow cable entry from bottom and is delivered in RAL7035 light grey. This active power filter which achieves above standards performance is certified to CE, UL, IBC 2015 AC156, EAC, RCM. And is designed to IEC 62477-1, IEC 61000-6-2, IEC 61000-6-4, IEC 61439-1, UL508 and IEEE 519-2014. Up to 10 units of different ratings can be paralleled, to achieve a maximum VAR injection of 2500 kVar either leading or lagging per current transformer set. Frame exterior dimensions are 582 millimetres in width, 438 millimetres in depth, 1323 millimetres in height and product weight 171 kg.
View AllClose

Related Products

Related Products