Schneider Electric

Schneider Electric EX225T65H Transformer, dry type, DOE 2016, 225kVA, 3 phase, 600V delta primary, 208Y/120V secondary, 25J, 150C rise

(No reviews yet) Write a Review
SKU:
EX225T65H
MPN:
EX225T65H
Condition:
New
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Type Of Cooling:
natural convection
Percentage Reactance:
0.000487
Environmental Disclosure:
ENVPEP1604028EN
Average Ambient Air Temperature For Operation:
30°C
X/R Ratio:
2.76
Material:
aluminium
Ambient Air Temperature For Operation:
40-40°C
Toxic Heavy Metal Free:
Yes
Temperature Rise:
150°C || 220°C insulated
Eu Rohs Directive:
Compliant
[Uimp] Rated Impulse Withstand Voltage:
10 kV
Mounting Support:
floor || floor, with 7400FMB
Pvc Free:
Yes
Country of Origin:
United States
Primary Voltage:
600 V delta
Halogen Content Performance:
Halogen free plastic parts product
Degree Of Protection:
UL type 1 || UL type 2, with 7400DS25J || UL type 3R, with 7400WS25J
Rated Operational Power In Va:
225 kVA
China Rohs Regulation:
Pro-active China RoHS declaration (out of China RoHS legal scope)
Mercury Free:
Yes
Electrical Connection:
4 Hole Nema Pad primary 11.1 mm || 6 Hole Nema Pad secondary 11.1 mm || 8 Hole Nema Pad sec - XO 11.1 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Phenyl Glycidyl Ether, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Reach Free Of Svhc:
Yes
Circularity Profile:
N/A
Box Number:
25J
Continuous Thermal Current Rating Factor:
1495 16.6 % || 1965 25 % || 4501 50 % || 8729 75 % || 14648 100 %
Standards:
UL 1561 || CSA C22.2 No 47 || NEMA ST-20
Percentage Impedance Voltage:
0.052
Phase:
3 phase
Range Of Product:
Square D
Noise Level:
6 dB NEMA ST-20 || 49 dB
Sustainable Offer Status:
Green Premium product
Transformer Type:
energy efficient
Device Short Name:
DOE 2016
Tap Loss:
328 || 328 no load (core loss) || 3965 load loss (coil loss) || 3965
Product Or Component Type:
transformer
Rohs Exemption Information:
Yes
Net Weight:
657.71 kg
Depth:
832 mm
Number Of Tap-Offs:
2 2.5 % FCAN || 4 2.5 % FCBN
Efficiency:
99.09 % at 35 % load factor , 75.0°C
Network Frequency:
60 Hz
Secondary Voltage:
208Y/120 V
[Ipk] Rated Peak Withstand Current:
12.0 kA
Weight:
657.71 kg
$21,721.00

Description

EX three phase low voltage dry type distribution transformers from Square D comply with DOE energy conservation standards and Natural Resources Canada (NRCan) minimum energy efficiency levels. This transformer is a 225kVA, 600V primary (three wire), 208Y/120V secondary (four wire) with aluminum windings with a 220 insulation system design for 150 degree C temperature rise. This transformer’s DOE 2016 and NRCan efficiency is a minimum of 98.94% at 35% loading and 75°C temperature. Terminals are designed to accommodate wire ranges sized for 125% of the secondary nameplate current and 250% of the primary nameplate current. The terminals allow for NEMA two hole lugs and wiring bending radius to align with the wire ranges and to allow for side and bottom access. Units are natural air cooled with exhaust vents located on the front only, allowing the transformers to be mounted with rear clearance to obstructions of ½ inch. Units are shipped as Type 1 for indoor installation, field convertible to Type 2 via dripshield for indoor applications with dropping water or to Type 3R via weathershield for outdoor installation. The transformer's open bottom design limits the units to floor mounting. EX transformers have a low sound level, with a minimum of 3dB below NEMA Standard ST-20 requirements. Units are specifically designed to function with other Square D equipment; inrush is coordinated to meet identified breaker trip curves, and IZ levels allow for let through current to match AIR levels of panelboards. See product data sheets for these values.
View AllClose

Related Products

Related Products