Schneider Electric

Schneider Electric EXN150T3HF Transformer, dry type, DOE 2016, 150kVA, 3 phase, 480V delta primary, 208Y/120V secondary, 22M, 115C rise

(No reviews yet) Write a Review
SKU:
EXN150T3HF
MPN:
EXN150T3HF
Condition:
New
Average Ambient Air Temperature For Operation:
30°C
Ambient Air Temperature For Operation:
40-40°C
Degree Of Protection:
UL type 2 || UL type 3R, with 7400WS22M
Range Of Product:
Square D
Device Application:
low voltage electrical distribution
Pvc Free:
Yes
Network Frequency:
60 Hz
Reach Regulation:
Free of Substances of Very High Concern above the threshold
[Ipk] Rated Peak Withstand Current:
12.65 kA
Reach Free Of Svhc:
Yes
Toxic Heavy Metal Free:
Yes
Device Short Name:
DOE 2016
Number Of Mounting Holes:
4 Ø: 13 mm
[Uimp] Rated Impulse Withstand Voltage:
10 kV
Rated Operational Power In Va:
150 kVA
Mounting Support:
floor || floor, with 7400FMB || ceiling, with 7400CMB22M
Phase:
3 phase
Temperature Rise:
115°C || 220°C insulated
X/R Ratio:
0.52
Eu Rohs Directive:
Compliant
Secondary Voltage:
208Y/120 V
Primary Operational Current:
180.42-180.42 A 416.36 A 150 kVA
Circularity Profile:
N/A
Noise Level:
47 dB || 3 dB NEMA ST-20
Efficiency:
98.90 % at 35 % load factor , 75.0°C
Weight:
459.04 kg
Primary Voltage:
480 V delta
Tap Loss:
307 no load (core loss) || 2592 load loss (coil loss)
Product Or Component Type:
transformer
Percentage Reactance:
0.0285
Depth:
827 mm
Rohs Exemption Information:
Yes
Box Number:
22M
Material:
aluminium
Net Weight:
459.04 kg
Height:
1031 mm
Country of Origin:
Mexico
Transformer Type:
energy efficient
Continuous Thermal Current Rating Factor:
1293 16.6 % || 1600 25 % || 3259 50 % || 6022 75 % || 9892 100 %
Number Of Tap-Offs:
2 2.5 % FCAN || 4 2.5 % FCBN
Environmental Disclosure:
ENVPEP1604028EN
Standards:
UL 1561 || CSA C22.2 No 47 || NEMA ST-20
California Proposition 65:
WARNING: This product can expose you to chemicals including: Phenyl Glycidyl Ether, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Type Of Cooling:
natural convection
Percentage Impedance Voltage:
0.0329
Inrush Current:
1972 A
Electrical Connection:
4 Hole Nema Pad secondary 11.1 mm || 6 Hole Nema Pad sec - XO 11.1 mm || 2 Hole Nema Pad primary 11.1 mm
Sustainable Offer Status:
Green Premium product
$11,511.00

Description

EXN three phase low voltage dry type distribution transformers from Square D comply with DOE energy conservation standards and Natural Resources Canada (NRCan) minimum energy efficiency levels. This transformer is a 150kVA, 480V primary (three wire), 208Y/120V secondary (four wire) with aluminum windings with a 220 insulation system design for 115 degree C temperature rise. This transformer’s DOE 2016 and NRCan efficiency is a minimum of 98.83% at 35% loading and 75°C temperature. Terminals are designed to accommodate wire ranges sized for 125% of the secondary nameplate current and 250% of the primary nameplate current. The terminals allow for NEMA two hole lugs and wiring bending radius to align with the wire ranges and to allow for side and bottom access. Units are natural air cooled with exhaust vents located on the front only, allowing the transformers to be mounted with rear clearance to obstructions of ½ inch. Units are shipped as Type 2 for indoor installation, field convertible to Type 3R via weathershield for outdoor installation. The transformers are floor mounted but field accessories are available for wall or trapeze (ceiling) mounting. EX transformers have a low sound level, with a minimum of 3dB below NEMA Standard ST-20 requirements. Units are specifically designed to function with other Square D equipment; inrush is coordinated to meet identified breaker trip curves, and IZ levels allow for let through current to match AIR levels of panelboards. See product data sheets for these values.
View AllClose

Related Products

Related Products