Schneider Electric

Schneider Electric EXN15T3H Transformer, dry type, DOE 2016, 15kVA, 3 phase, 480V delta primary, 208Y/120V secondary, 17M, 150C rise

(No reviews yet) Write a Review
SKU:
EXN15T3H
MPN:
EXN15T3H
Condition:
New
Sustainable Offer Status:
Green Premium product
Depth:
538 mm
Net Weight:
85.28 kg
Primary Voltage:
480 V delta
Percentage Reactance:
0.0179
Mounting Support:
floor || floor, with 7400FMB || ceiling, with 7400CMB17M || wall, with 7400WMB17M
Secondary Voltage:
208Y/120 V
Inrush Current:
207 A
Reach Free Of Svhc:
Yes
Environmental Disclosure:
ENVPEP1604028EN
Type Of Cooling:
natural convection
California Proposition 65:
WARNING: This product can expose you to chemicals including: Phenyl Glycidyl Ether, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Country of Origin:
Mexico
Rated Operational Power In Va:
15 kVA
Transformer Type:
energy efficient
Phase:
3 phase
Eu Rohs Directive:
Compliant
Continuous Thermal Current Rating Factor:
227 16.6 % || 297 25 % || 676 50 % || 1307 75 % || 2191 100 %
Primary Operational Current:
18.04-18.04 A 41.64 A 15 kVA
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Network Frequency:
60 Hz
X/R Ratio:
0.53
Rohs Exemption Information:
Yes
Pvc Free:
Yes
Product Or Component Type:
transformer
Number Of Mounting Holes:
4 Ø: 13 mm
Material:
aluminium
Circularity Profile:
N/A
Standards:
UL 1561 || CSA C22.2 No 47 || NEMA ST-20
China Rohs Regulation:
Pro-active China RoHS declaration (out of China RoHS legal scope)
Weight:
85.28 kg
Percentage Impedance Voltage:
0.0403
Device Short Name:
DOE 2016
[Uimp] Rated Impulse Withstand Voltage:
10 kV
Range Of Product:
Square D
[Ipk] Rated Peak Withstand Current:
1.03 kA
Toxic Heavy Metal Free:
Yes
Degree Of Protection:
UL type 2 || UL type 3R
Mercury Free:
Yes
Electrical Connection:
2 Hole Nema Pad primary 11.1 mm || 2 Hole Nema Pad secondary 11.1 mm || 4 Hole Nema Pad sec - XO 11.1 mm
Halogen Content Performance:
Halogen free plastic parts product
Tap Loss:
50 no load (core loss) || 592 load loss (coil loss)
Noise Level:
3 dB NEMA ST-20 || 42 dB
Efficiency:
97.96 % at 35 % load factor , 75.0°C
Average Ambient Air Temperature For Operation:
30°C
Temperature Rise:
150°C || 220°C insulated
$2,511.00

Description

EXN three phase low voltage dry type distribution transformers from Square D comply with DOE energy conservation standards and Natural Resources Canada (NRCan) minimum energy efficiency levels. This transformer is a 15kVA, 480V primary (three wire), 208Y/120V secondary (four wire) with aluminum windings with a 220 insulation system design for 150 degree C temperature rise. This transformer’s DOE 2016 and NRCan efficiency is a minimum of 97.89% at 35% loading and 75°C temperature. Terminals are designed to accommodate wire ranges sized for 125% of the secondary nameplate current and 250% of the primary nameplate current. The terminals allow for NEMA two hole lugs and wiring bending radius to align with the wire ranges and to allow for side and bottom access. Units are natural air cooled with exhaust vents located on the front only, allowing the transformers to be mounted with rear clearance to obstructions of ½ inch. Units are shipped as Type 2 for indoor installation, field convertible to Type 3R via weathershield for outdoor installation. The transformers are floor mounted but field accessories are available for wall or trapeze (ceiling) mounting. EX transformers have a low sound level, with a minimum of 3dB below NEMA Standard ST-20 requirements. Units are specifically designed to function with other Square D equipment; inrush is coordinated to meet identified breaker trip curves, and IZ levels allow for let through current to match AIR levels of panelboards. See product data sheets for these values.
View AllClose