Schneider Electric

Schneider Electric EXN15T65H Transformer, dry type, DOE 2016, 15kVA, 3 phase, 600V delta primary, 208Y/120V secondary, 17M, 150C rise

(No reviews yet) Write a Review
SKU:
EXN15T65H
MPN:
EXN15T65H
Condition:
New
Material:
aluminium
Tap Loss:
50 no load (core loss) || 595 load loss (coil loss)
Secondary Voltage:
208Y/120 V
Number Of Mounting Holes:
4 Ø: 13 mm
Country of Origin:
Mexico
Device Application:
low voltage electrical distribution
Weight:
85.28 kg
Mounting Support:
floor || floor, with 7400FMB || ceiling, with 7400CMB17M || wall, with 7400WMB17M
Percentage Reactance:
0.0178
Phase:
3 phase
Halogen Content Performance:
Halogen free plastic parts product
Range Of Product:
Square D
Ambient Air Temperature For Operation:
40-40°C
China Rohs Regulation:
Pro-active China RoHS declaration (out of China RoHS legal scope)
Temperature Rise:
150°C || 220°C insulated
Mercury Free:
Yes
Depth:
538 mm
Primary Voltage:
600 V delta
Standards:
UL 1561 || CSA C22.2 No 47 || NEMA ST-20
Reach Regulation:
Free of Substances of Very High Concern above the threshold
[Ipk] Rated Peak Withstand Current:
0.96 kA
Reach Free Of Svhc:
Yes
Efficiency:
97.96 % at 35 % load factor , 75.0°C
Network Frequency:
60 Hz
Inrush Current:
217 A
[Uimp] Rated Impulse Withstand Voltage:
10 kV
California Proposition 65:
WARNING: This product can expose you to chemicals including: Phenyl Glycidyl Ether, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Device Short Name:
DOE 2016
Number Of Tap-Offs:
2 2.5 % FCAN || 4 2.5 % FCBN
Average Ambient Air Temperature For Operation:
30°C
Toxic Heavy Metal Free:
Yes
Product Or Component Type:
transformer
Pvc Free:
Yes
Degree Of Protection:
UL type 2 || UL type 3R, with 7400WS22M
Box Number:
17M
Primary Operational Current:
14.43-14.43 A 41.64 A 15 kVA
Rated Operational Power In Va:
15 kVA
Eu Rohs Directive:
Compliant
Electrical Connection:
2 Hole Nema Pad primary 11.1 mm || 2 Hole Nema Pad secondary 11.1 mm || 4 Hole Nema Pad sec - XO 11.1 mm
Percentage Impedance Voltage:
0.0432
Net Weight:
85.28 kg
Noise Level:
6 dB NEMA ST-20 || 39 dB
Rohs Exemption Information:
Yes
Transformer Type:
energy efficient
Continuous Thermal Current Rating Factor:
227 16.6 % || 297 25 % || 678 50 % || 1313 75 % || 2201 100 %
Circularity Profile:
N/A
$3,276.00

Description

EXN three phase low voltage dry type distribution transformers from Square D comply with DOE energy conservation standards and Natural Resources Canada (NRCan) minimum energy efficiency levels. This transformer is a 15kVA, 600V primary (three wire), 208Y/120V secondary (four wire) with aluminum windings with a 220 insulation system design for 150 degree C temperature rise. This transformer’s DOE 2016 and NRCan efficiency is a minimum of 97.89% at 35% loading and 75°C temperature. Terminals are designed to accommodate wire ranges sized for 125% of the secondary nameplate current and 250% of the primary nameplate current. The terminals allow for NEMA two hole lugs and wiring bending radius to align with the wire ranges and to allow for side and bottom access. Units are natural air cooled with exhaust vents located on the front only, allowing the transformers to be mounted with rear clearance to obstructions of ½ inch. Units are shipped as Type 2 for indoor installation, field convertible to Type 3R via weathershield for outdoor installation. The transformers are floor mounted but field accessories are available for wall or trapeze (ceiling) mounting. EX transformers have a low sound level, with a minimum of 3dB below NEMA Standard ST-20 requirements. Units are specifically designed to function with other Square D equipment; inrush is coordinated to meet identified breaker trip curves, and IZ levels allow for let through current to match AIR levels of panelboards. See product data sheets for these values.
View AllClose