Schneider Electric

Schneider Electric EXN30T65HCU Transformer, dry type, DOE 2016, 30kVA, 3 phase, 600V delta primary, 208Y/120V secondary, 18M, 150C rise, Cu

(No reviews yet) Write a Review
SKU:
EXN30T65HCU
MPN:
EXN30T65HCU
Condition:
New
Pvc Free:
Yes
Percentage Impedance Voltage:
0.0388
Mercury Free:
Yes
Box Number:
18M
Number Of Mounting Holes:
4 Ø: 13 mm
Electrical Connection:
2 Hole Nema Pad secondary 11.1 mm || 4 Hole Nema Pad sec - XO 11.1 mm || 2 Hole Nema Pad primary 11.1 mm
California Proposition 65:
WARNING: This product can expose you to chemicals including: Phenyl Glycidyl Ether, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Circularity Profile:
N/A
Mounting Support:
floor || floor, with 7400FMB || ceiling, with 7400CMB18M19M20M || wall, with 7400WMB18M19M20M
Ambient Air Temperature For Operation:
40-40°C
[Uimp] Rated Impulse Withstand Voltage:
10 kV
Transformer Type:
energy efficient
Efficiency:
98.45 % at 35 % load factor , 75.0°C
Net Weight:
163.75 kg
Secondary Voltage:
208Y/120 V
Inrush Current:
360 A
Percentage Reactance:
0.0224
Environmental Disclosure:
ENVPEP1604027EN
Sustainable Offer Status:
Green Premium product
Primary Operational Current:
28.87-28.87 A 83.27 A 30 kVA
Rated Operational Power In Va:
30 kVA
Reach Free Of Svhc:
Yes
Number Of Tap-Offs:
2 2.5 % FCAN || 4 2.5 % FCBN
Noise Level:
6 dB NEMA ST-20 || 39 dB
Weight:
163.75 kg
Phase:
3 phase
Primary Voltage:
600 V delta
Network Frequency:
60 Hz
Rohs Exemption Information:
Yes
Degree Of Protection:
UL type 2 || UL type 3R, with 7400WS18M19M20M
X/R Ratio:
0.71
Continuous Thermal Current Rating Factor:
324 16.6 % || 440 25 % || 1062 50 % || 2100 75 % || 3552 100 %
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Depth:
627 mm
Range Of Product:
Square D
Eu Rohs Directive:
Compliant
Material:
copper
Toxic Heavy Metal Free:
Yes
Type Of Cooling:
natural convection
[Ipk] Rated Peak Withstand Current:
2.15 kA
Product Or Component Type:
transformer
China Rohs Regulation:
Pro-active China RoHS declaration (out of China RoHS legal scope)
Device Short Name:
DOE 2016
Standards:
UL 1561 || CSA C22.2 No 47 || NEMA ST-20
Temperature Rise:
150°C || 220°C insulated
Device Application:
low voltage electrical distribution
$6,477.00

Description

EXN three phase low voltage dry type distribution transformers from Square D comply with DOE energy conservation standards and Natural Resources Canada (NRCan) minimum energy efficiency levels. This transformer is a 30kVA, 600V primary (three wire), 208Y/120V secondary (four wire) with copper windings with a 220 insulation system design for 150 degree C temperature rise. This transformer’s DOE 2016 and NRCan efficiency is a minimum of 98.23% at 35% loading and 75°C temperature. Terminals are designed to accommodate wire ranges sized for 125% of the secondary nameplate current and 250% of the primary nameplate current. The terminals allow for NEMA two hole lugs and wiring bending radius to align with the wire ranges and to allow for side and bottom access. Units are natural air cooled with exhaust vents located on the front only, allowing the transformers to be mounted with rear clearance to obstructions of ½ inch. Units are shipped as Type 2 for indoor installation, field convertible to Type 3R via weathershield for outdoor installation. The transformers are floor mounted but field accessories are available for wall or trapeze (ceiling) mounting. EX transformers have a low sound level, with a minimum of 3dB below NEMA Standard ST-20 requirements. Units are specifically designed to function with other Square D equipment; inrush is coordinated to meet identified breaker trip curves, and IZ levels allow for let through current to match AIR levels of panelboards. See product data sheets for these values.
View AllClose