Schneider Electric

Schneider Electric HGP36090 Circuit breaker, PowerPacT H, 90A, 3 pole, 600VAC, 18kA, lugs, thermal magnetic, 80%

(No reviews yet) Write a Review
SKU:
HGP36090
MPN:
HGP36090
Condition:
New
Breaking Capacity Code:
G
Pollution Degree:
3 IEC 60947-1
Product Certifications:
UL || CSA || NOM
Pvc Free:
Yes
Mounting Support:
lug
Trip Unit Technology:
thermal-magnetic
Weight:
2.2 kg
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Terminal Identifier:
AL150HD
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Magnetic Tripping Current:
1450-1450 A
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Ambient Air Temperature For Operation:
-25-70°C
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
Continuous Current Rating:
0.8
Network Frequency:
50/60 Hz
Control Type:
toggle
Length:
16 mm
Magnetic Hold Current:
800 A
Device Application:
distribution
Mounting Mode:
unit mount lug)
Eu Rohs Directive:
Compliant
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Mercury Free:
Yes
Country of Origin:
United States
Warranty:
18 months
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Electrical Connection:
terminal nut, line || lugs, load
Ip Degree Of Protection:
front cover IP40 IEC 60529
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Poles Description:
3P
Suitability For Isolation:
yes IEC 60947-2
Ambient Air Temperature For Storage:
-50-85°C
Line Rated Current:
90-90 A
Sustainable Offer Status:
Green Premium product
Communication Interface:
Modbus || Ethernet
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
Circuit Breaker Application:
HACR rated
Rohs Exemption Information:
Yes
Range:
PowerPact
Local Signaling:
switched off (OFF) 1 trip indicator green)
Depth:
86 mm
Protected Poles Description:
3t
$2,551.50

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 18kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has terminal nuts on the line side and lugs on the load side. This PowerPacT H, 90A, 3 pole, circuit breaker has a breaking capacity of 18kA at 600VAC. This circuit breaker has a continuous current rating of 80%. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose