Schneider Electric

Schneider Electric HJA36020SA Circuit breaker, PowerPacT H, 20A, 3 pole, 600VAC, 25kA, I-Line, thermal magnetic, 80%, shunt, ABC

(No reviews yet) Write a Review
SKU:
HJA36020SA
MPN:
HJA36020SA
Condition:
New
Magnetic Tripping Current:
750-750 A
Protected Poles Description:
3t
Trip Unit Technology:
thermal-magnetic
Continuous Current Rating:
0.8
Ip Degree Of Protection:
front cover IP40 IEC 60529
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
Ambient Air Temperature For Operation:
-25-70°C
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
Accessory / Separate Part Type:
shunt trip 110...130 V AC compartment
Rohs Exemption Information:
Yes
Pvc Free:
Yes
Height:
4.5 in
Height:
163 mm
Magnetic Hold Current:
350 A
Length:
16 mm
Sustainable Offer Status:
Green Premium product
Warranty:
18 months
Circuit Breaker Application:
HACR rated
Device Application:
distribution
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Terminal Identifier:
AL150HD
Local Signaling:
switched off (OFF) 1 trip indicator green)
Product Or Component Type:
circuit breaker
[Ics] Rated Service Breaking Capacity:
100 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 65 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 25 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Quality Labels:
CE
Weight:
2.2 kg
Depth:
86 mm
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
Mounting Height:
4.5 in
Line Rated Current:
20-20 A
Range:
PowerPact
Net Weight:
2.2 kg
Country of Origin:
United States
Eu Rohs Directive:
Compliant with Exemptions
Wire Stripping Length:
16 mm
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Product Certifications:
UL || CSA || NOM
Mounting Mode:
I-Line bracket)
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Suitability For Isolation:
yes IEC 60947-2
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Network Frequency:
50/60 Hz
Communication Interface:
Modbus || Ethernet
Circularity Profile:
ENVEOLI2206027EN
Breaking Capacity Code:
J
Mercury Free:
Yes
$4,057.50

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 25kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. PowerPacT H I-Line circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. This breaker has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT H, 20A, 3 pole, circuit breaker has a breaking capacity of 25kA at 600VAC. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. This unit includes a factory installed 120VAC shunt trip. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose

Related Products

Related Products