Schneider Electric

Schneider Electric HJP36110 Circuit breaker, PowerPacT H, 110A, 3 pole, 600VAC, 25kA, lugs, thermal magnetic, 80%

(No reviews yet) Write a Review
SKU:
HJP36110
MPN:
HJP36110
Condition:
New
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
Width:
104 mm
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
Length:
16 mm
Circularity Profile:
ENVEOLI2206027EN
Product Certifications:
UL || CSA || NOM
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Poles Description:
3P
Trip Unit Technology:
thermal-magnetic
Mounting Support:
lug
Utilisation Category:
category A
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Product Or Component Type:
circuit breaker
Sustainable Offer Status:
Green Premium product
Pvc Free:
Yes
Protected Poles Description:
3t
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Magnetic Tripping Current:
1700-1700 A
Line Rated Current:
110-110 A
Quantity Per Set:
1
Color:
Black
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Rohs Exemption Information:
Yes
Local Signaling:
switched off (OFF) 1 trip indicator green)
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Control Type:
toggle
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Network Frequency:
50/60 Hz
Breaking Capacity Code:
J
Environmental Disclosure:
ENVPEP2206027EN
Mercury Free:
Yes
Height:
163 mm
Warranty:
18 months
Communication Interface:
Modbus || Ethernet
Device Application:
distribution
Magnetic Hold Current:
900 A
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Terminal Identifier:
AL150HD
Suitability For Isolation:
yes IEC 60947-2
Pollution Degree:
3 IEC 60947-1
Quality Labels:
CE
Continuous Current Rating:
0.8
Country of Origin:
United States
Product Name:
PowerPact H
Mounting Mode:
unit mount lug)
Wire Stripping Length:
16 mm
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Weight:
2.2 kg
$5,174.00

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 25kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has terminal nuts on the line side and lugs on the load side. This PowerPacT H, 110A, 3 pole, circuit breaker has a breaking capacity of 25kA at 600VAC. This circuit breaker has a continuous current rating of 80%. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose