Schneider Electric

Schneider Electric HLA260204 Circuit breaker, PowerPacT H, 20A, 2 pole, 600VAC, 50kA, I-Line, thermal magnetic, 80%, BC

(No reviews yet) Write a Review
SKU:
HLA260204
MPN:
HLA260204
Condition:
New
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Product Or Component Type:
circuit breaker
Sustainable Offer Status:
Green Premium product
Device Application:
distribution
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
Length:
16 mm
Control Type:
toggle
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
Communication Interface:
Modbus || Ethernet
Height:
163 mm
Depth:
86 mm
[Ics] Rated Service Breaking Capacity:
125 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 100 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 50 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Color:
Black
Protected Poles Description:
2t
Ip Degree Of Protection:
front cover IP40 IEC 60529
Mounting Support:
bracket
Circuit Breaker Application:
HACR rated
Net Weight:
2.2 kg
Pollution Degree:
3 IEC 60947-1
Electrical Connection:
I-Line connection, line || lugs, load
Breaking Capacity Code:
L
Magnetic Tripping Current:
750-750 A
Magnetic Hold Current:
350 A
Ambient Air Temperature For Storage:
-50-85°C
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Line Rated Current:
20-20 A
Suitability For Isolation:
yes IEC 60947-2
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Network Frequency:
50/60 Hz
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Breaking Capacity:
125 kA 240 V AC 50/60 Hz UL 489 || 100 kA 480 V AC 50/60 Hz UL 489 || 50 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489 || 50 kA 500 V DC UL 489
Mercury Free:
Yes
Rohs Exemption Information:
Yes
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Environmental Disclosure:
ENVPEP2206027EN
Quality Labels:
CE
Continuous Current Rating:
0.8
Utilisation Category:
category A
Wire Stripping Length:
16 mm
Trip Unit Technology:
thermal-magnetic
Warranty:
18 months
Weight:
2.2 kg
Product Certifications:
UL || CSA || NOM
Mounting Mode:
I-Line bracket)
Circularity Profile:
ENVEOLI2206027EN
Product Name:
PowerPact H
Mounting Height:
4.5 in
$3,724.50

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 50kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. PowerPacT H I-Line circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. This breaker has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT H, 20A, 2 pole, circuit breaker has a breaking capacity of 50kA at 600VAC. This circuit breaker has a continuous current rating of 80% with a BC phase connection. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose