Schneider Electric

Schneider Electric HLL36125LV Circuit breaker, PowerPacT H, 125A, 3 pole, 600VAC, 50kA, lugs, thermal magnetic, 80%, control wire OFF end

(No reviews yet) Write a Review
SKU:
HLL36125LV
MPN:
HLL36125LV
Condition:
New
Country of Origin:
Mexico
Warranty:
18 months
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Mounting Mode:
unit mount lug)
Awg Gauge:
AWG 14...AWG 3/0 aluminium/copper terminal
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Product Or Component Type:
circuit breaker
Tightening Torque:
5-5 N.m 2.5-6 mm² (AWG 14...AWG 10) || 14-14 N.m 10-95 mm² (AWG 8...AWG 3/0)
Circularity Profile:
ENVEOLI2206027EN
Utilisation Category:
category A
Mounting Support:
lug
Weight:
2.2 kg
Range:
PowerPact
Product Certifications:
UL || CSA || NOM
Magnetic Tripping Current:
1700-1700 A
Wire Stripping Length:
16 mm
Net Weight:
2.2 kg
Length:
16 mm
Ambient Air Temperature For Storage:
-50-85°C
Mercury Free:
Yes
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Network Frequency:
50/60 Hz
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Communication Interface:
Modbus || Ethernet
Quantity Per Set:
1
Environmental Disclosure:
ENVPEP2206027EN
Color:
Black
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Ambient Air Temperature For Operation:
-25-70°C
Sustainable Offer Status:
Green Premium product
Pollution Degree:
3 IEC 60947-1
Line Rated Current:
125-125 A
Depth:
86 mm
[Ics] Rated Service Breaking Capacity:
125 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 100 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 50 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Magnetic Hold Current:
900 A
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Suitability For Isolation:
yes IEC 60947-2
Width:
104 mm
Eu Rohs Directive:
Compliant with Exemptions
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Control Type:
toggle
Continuous Current Rating:
0.8
Height:
163 mm
Trip Unit Technology:
thermal-magnetic
Rohs Exemption Information:
Yes
Ip Degree Of Protection:
front cover IP40 IEC 60529
Terminal Identifier:
AL150HD
Local Signaling:
switched off (OFF) 1 trip indicator green)
Breaking Capacity Code:
L
Quality Labels:
CE
$6,802.00

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 50kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has lugs on both the line and load sides. This PowerPacT H, 125A, 3 pole, circuit breaker has a breaking capacity of 50kA at 600VAC. This circuit breaker has a continuous current rating of 80%. This unit includes a control wire terminal on the load end. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose