Schneider Electric

Schneider Electric HR8IMA16C1 Surge protection device, Surgelogic, HR, 160kA, 600Y/347 VAC, 3 phase, 4 wire, SPD type 1

(No reviews yet) Write a Review
SKU:
HR8IMA16C1
MPN:
HR8IMA16C1
Condition:
New
Rohs Exemption Information:
Yes
Cable Length:
483 mm
[Ue] Rated Operational Voltage:
600Y/347 V AC
Breaking Capacity:
100 kA
Range Of Product:
Surgelogic
Surge Current:
160 kA
California Proposition 65:
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Line Rated Current:
60 A
Country of Origin:
Mexico
Mounting Support:
panel mounting
Breaking Capacity Code:
HR
Product Or Component Type:
surge protection device
Nema Degree Of Protection:
NEMA 1
Connections - Terminals:
I-Line line || lugs ground AWG 6 copper 4 N.m || lugs neutral AWG 6 copper 4 N.m
Number Of Poles:
3
Local Signaling:
status LED green per phase normal operation || status LED red per phase fault
Eu Rohs Directive:
Compliant
Trip Unit Technology:
electronic
[Uc] Maximum Continuous Operating Voltage:
420 V
Depth:
142.1 mm
Length:
483 mm
Provided Equipment:
alarm enable/disable switch || surge counter || circuit-breaker
Short-Circuit Protection:
200 kA
Phase:
3 phase
Device Short Name:
IMA
Standards:
UL 1449:ed. 3 || CSA C22.2 No 8:1986 || UL 96A:ed. 12 || UL 489:ed. 11 || CSA C22.2 No 5-09
Mercury Free:
Yes
Wiring Configuration:
4-wire
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
$12,482.00

Description

Surgelogic™ Type IMA systems are internal surgical protection devices with a focus on service entrance and critical branch panel surge suppresion. With a surge current rating of 160,000 Amps and enhanced EMI/RFI filtering, this unit is retrofitted to be installed in a wide variety I-Line Branch units. Being modular in design, this unit is able to achieve superior surge suppression on the line side without an external overcurrent protective device. This unit uses the WYE system to allow two different voltages using three phase. This product is UL and CSA certified.
View AllClose

Related Products

Related Products