Schneider Electric

Schneider Electric HRL36100CU31X Circuit breaker, PowerPacT H, 100A, 3 pole, 600VAC, 100kA, lugs, Micrologic 3.2, 100%

(No reviews yet) Write a Review
SKU:
HRL36100CU31X
MPN:
HRL36100CU31X
Condition:
New
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Product Certifications:
UL || CSA || NOM
Range:
PowerPact
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Utilisation Category:
category A
Line Rated Current:
100-100 A
Ambient Air Temperature For Operation:
-25-70°C
Circularity Profile:
ENVEOLI2206028EN
Device Application:
distribution
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Communication Interface:
Modbus || Ethernet
Terminal Identifier:
AL150HD
Rohs Exemption Information:
Yes
[Ics] Rated Service Breaking Capacity:
150 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 125 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 75 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 690 V AC 50/60 Hz IEC 60947-2
Breaking Capacity:
200 kA 240 V AC 50/60 Hz UL 489 || 200 kA 480 V AC 50/60 Hz UL 489 || 100 kA 600 V AC 50/60 Hz UL 489
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Network Frequency:
50/60 Hz
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Height:
163 mm
Breaking Capacity Code:
R
Environmental Disclosure:
ENVPEP2206028EN
Eu Rohs Directive:
Compliant with Exemptions
Control Type:
toggle
Suitability For Isolation:
yes IEC 60947-2
Pollution Degree:
3 IEC 60947-1
Protected Poles Description:
3t
Weight:
2.2 kg
[Ue] Rated Operational Voltage:
690 V AC 50/60 Hz IEC 60947-3
Mounting Support:
lug
Product Name:
PowerPact H
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Width:
104 mm
Mounting Mode:
unit mount lug)
Length:
16 mm
Continuous Current Rating:
1
Trip Unit Name:
MicroLogic 3.2
Poles Description:
3P
Mercury Free:
Yes
Product Or Component Type:
circuit breaker
Circuit Breaker Application:
HACR rated
Net Weight:
2.2 kg
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Electrical Connection:
lugs, line || lugs, load
Pvc Free:
Yes
Sustainable Offer Status:
Green Premium product
Ambient Air Temperature For Storage:
-50-85°C
Country of Origin:
United States
Trip Unit Technology:
electronic, standard, MicroLogic 3.2, LI
Ip Degree Of Protection:
front cover IP40 IEC 60529
$7,642.50

Description

PowerPacT H-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT H-Frame circuit breakers are available with either thermal magnetic or Micrologic electronic trip protection units. This PowerPacT H-Frame circuit breaker provides Micrologic Standard with a 3.2 trip unit and an LI function with a breaking capacity of 100kA at 600VAC. All PowerPacT H-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT H circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has lugs on both the line and load sides. This PowerPacT H, 100A, 3 pole, circuit breaker has a breaking capacity of 100kA at 600VAC. This circuit breaker has a continuous current rating of 100%. PowerPacT H circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose