Schneider Electric

Schneider Electric JDL36250TU31X Circuit breaker, PowerPacT J, 250A, 3 pole, 600VAC, 14kA, lugs, Micrologic 3.2, 80%

(No reviews yet) Write a Review
SKU:
JDL36250TU31X
MPN:
JDL36250TU31X
Condition:
New
Pvc Free:
Yes
Utilisation Category:
category A
Trip Unit Technology:
electronic, standard, MicroLogic 3.2, LI
Device Application:
distribution
Rohs Exemption Information:
Yes
Ambient Air Temperature For Storage:
-50-85°C
Tightening Torque:
25-25 N.m 95-185 mm² (AWG 3/0...350 kcmil)
Breaking Capacity Code:
D
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Mercury Free:
Yes
Control Type:
toggle
Sustainable Offer Status:
Green Premium product
Awg Gauge:
AWG 3/0...350 kcmil aluminium/copper terminals
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Range:
PowerPact
Poles Description:
3P
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
[Ics] Rated Service Breaking Capacity:
25 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 18 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 14 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Pollution Degree:
3 IEC 60947-1
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Protection Type:
overload protection || short-circuit protection
Eu Rohs Directive:
Compliant with Exemptions
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Network Frequency:
50/60 Hz
Terminal Identifier:
AL250JD
Ambient Air Temperature For Operation:
-25-70°C
Country of Origin:
United States
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Local Signaling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm 1 LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Electrical Connection:
lugs, line || lugs, load
Environmental Disclosure:
ENVPEP2206032EN
Weight:
2.4 kg
Mounting Support:
lug
Length:
25 mm
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Quality Labels:
CE
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Line Rated Current:
250-250 A
Net Weight:
2.4 kg
Ip Degree Of Protection:
front cover IP40
Circuit Breaker Application:
HACR rated
Wire Stripping Length:
25 mm
Continuous Current Rating:
0.8
Breaking Capacity:
25 kA 240 V AC 50/60 Hz UL 489 || 18 kA 480 V AC 50/60 Hz || 14 kA 600 V AC 50/60 Hz || 20 kA 250 V DC
$4,435.50

Description

PowerPacT J-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT J-Frame circuit breakers are available with either thermal magnetic or MicroLogic electronic trip protection units. This PowerPacT J-Frame circuit breaker provides Micrologic Standard with a 3.2 trip unit and an LI function with a breaking capacity of 14kA at 600VAC. All PowerPacT J-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT J circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has lugs on both the line and load sides. This PowerPacT J, 250A, 3 pole, circuit breaker has a breaking capacity of 14kA at 600VAC. This circuit breaker has a continuous current rating of 80%. This unit allows field-interchangeable trip units. PowerPacT J circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose

Related Products

Related Products