Schneider Electric

Schneider Electric JGL36200AASA Circuit breaker, PowerPacT J, 200A, 3 pole, 600VAC, 18kA, lugs, thermal magnetic, 80%, aux, shunt

(No reviews yet) Write a Review
SKU:
JGL36200AASA
MPN:
JGL36200AASA
Condition:
New
Product Certifications:
UL || CSA || NOM
Tightening Torque:
25-25 N.m 95-185 mm² (AWG 3/0...350 kcmil)
Mounting Support:
lug
Terminal Identifier:
AL250JD
Protection Type:
overload protection || short-circuit protection
Control Type:
toggle
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Communication Interface:
Modbus || Ethernet
Magnetic Tripping Current:
2000-2000 A
Mounting Mode:
unit mount lug)
Mercury Free:
Yes
Net Weight:
2.4 kg
Depth:
86 mm
Sustainable Offer Status:
Green Premium product
Length:
25 mm
Suitability For Isolation:
yes IEC 60947-2
Country of Origin:
United States
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Pollution Degree:
3 IEC 60947-1
Range:
PowerPact
Environmental Disclosure:
ENVPEP2206031EN
Warranty:
18 months
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Weight:
2.4 kg
Rohs Exemption Information:
Yes
Electrical Connection:
lugs, line || lugs, load
Awg Gauge:
AWG 3/0...350 kcmil aluminium/copper terminals
Product Name:
PowerPact J
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Device Application:
distribution
Wire Stripping Length:
25 mm
Eu Rohs Directive:
Compliant with Exemptions
Ambient Air Temperature For Operation:
-25-70°C
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Local Signaling:
switched off (OFF) 1 trip indicator green)
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Network Frequency:
50/60 Hz
Breaking Capacity Code:
G
Breaking Capacity:
65 kA 240 V AC 50/60 Hz UL 489 || 35 kA 480 V AC 50/60 Hz UL 489 || 18 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489 || 20 kA 500 V DC UL 489
Utilisation Category:
category A
Pvc Free:
Yes
Trip Unit Technology:
thermal-magnetic
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Continuous Current Rating:
0.8
Ip Degree Of Protection:
front cover IP40
$7,189.50

Description

PowerPacT J-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT J-Frame circuit breakers are available with either thermal magnetic or MicroLogic electronic trip protection units. This PowerPacT J-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 18kA at 600VAC. All PowerPacT J-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT J circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has lugs on both the line and load sides. This PowerPacT J, 200A, 3 pole, circuit breaker has a breaking capacity of 18kA at 600VAC. This circuit breaker has a continuous current rating of 80%. This unit includes a factory installed 1A/1B auxiliary switch and 120VAC shunt trip. PowerPacT J circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose