Schneider Electric

Schneider Electric JJA362006 Circuit breaker, PowerPacT J, 200A, 3 pole, 600VAC, 25kA, I-Line, thermal magnetic, 80%, CBA

(No reviews yet) Write a Review
SKU:
JJA362006
MPN:
JJA362006
Condition:
New
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
Pollution Degree:
3 IEC 60947-1
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Height:
4.5 in
Depth:
86 mm
Mounting Support:
bracket
Product Name:
PowerPact J
Country of Origin:
United States
Line Rated Current:
200-200 A
Pvc Free:
Yes
Ip Degree Of Protection:
front cover IP40
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Awg Gauge:
AWG 3/0...350 kcmil aluminium/copper terminals
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Mounting Mode:
I-Line bracket)
Weight:
2.4 kg
Ambient Air Temperature For Storage:
-50-85°C
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Environmental Disclosure:
ENVPEP2206031EN
Wire Stripping Length:
25 mm
Rohs Exemption Information:
Yes
Ambient Air Temperature For Operation:
-25-70°C
Magnetic Tripping Current:
2000-2000 A
Network Frequency:
50/60 Hz
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Sustainable Offer Status:
Green Premium product
Continuous Current Rating:
0.8
Net Weight:
2.4 kg
Poles Description:
3P
Communication Interface:
Modbus || Ethernet
Local Signaling:
switched off (OFF) 1 trip indicator green)
Trip Unit Technology:
thermal-magnetic
Magnetic Hold Current:
1000 A
Circularity Profile:
ENVEOLI2206031EN
Warranty:
18 months
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Height:
191 mm
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Mercury Free:
Yes
Width:
104 mm
Breaking Capacity Code:
J
Device Application:
distribution
Length:
25 mm
Eu Rohs Directive:
Compliant with Exemptions
Tightening Torque:
25-25 N.m 95-185 mm² (AWG 3/0...350 kcmil)
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Circuit Breaker Application:
HACR rated
Electrical Connection:
I-Line connection, line || lugs, load
Product Certifications:
UL || CSA || NOM
$5,705.00

Description

PowerPacT J-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT J-Frame circuit breakers are available with either thermal magnetic or MicroLogic electronic trip protection units. This PowerPacT J-Frame circuit breaker provides thermal magnetic circuit protection with a breaking capacity of 25kA at 600VAC. All PowerPacT J-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT J circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. PowerPacT J I-Line circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. This unit has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT J, 200A, 3 pole, circuit breaker has a breaking capacity of 25kA at 600VAC. This circuit breaker has a continuous current rating of 80% with a CBA phase connection. PowerPacT J circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose

Related Products

Related Products