Schneider Electric

Schneider Electric JJL36250M38X Motor circuit protector, PowerPacT J, 250A, 3 pole, 600VAC, 25kA, lugs, Micrologic 2.2, 80%

(No reviews yet) Write a Review
SKU:
JJL36250M38X
MPN:
JJL36250M38X
Condition:
New
Circularity Profile:
ENVEOLI2206031EN
[Ith] Conventional Free Air Thermal Current:
114-217 A
Breaking Capacity Code:
J
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Control Type:
toggle
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Network Frequency:
50/60 Hz
Terminal Identifier:
AL250JD
Line Rated Current:
250-250 A
Product Or Component Type:
Motor Circuit Protector
Breaking Capacity:
100 kA 240 V AC 50/60 Hz UL 489 || 65 kA 480 V AC 50/60 Hz UL 489 || 25 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489
Continuous Current Rating:
0.8
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Ambient Air Temperature For Storage:
-50-85°C
Magnetic Hold Current:
1250 A
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Rohs Exemption Information:
Yes
Trip Unit Technology:
thermal-magnetic
Depth:
86 mm
Ambient Air Temperature For Operation:
-25-70°C
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Pollution Degree:
3
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Magnetic Tripping Current:
2500-2500 A
Ip Degree Of Protection:
front cover IP40
Length:
25 mm
Warranty:
18 months
Wire Stripping Length:
25 mm
Awg Gauge:
AWG 3/0...350 kcmil aluminium/copper terminals
Mounting Mode:
unit mount lug)
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Suitability For Isolation:
yes IEC 60947-2
Local Signaling:
switched off (OFF) 1 trip indicator green) || ready 1 LED green) || alarm LED 95 % Ith red)
Environmental Disclosure:
ENVPEP2206031EN
Mounting Support:
lug
Utilisation Category:
category A
Product Certifications:
UL || CSA || NOM
Pvc Free:
Yes
Mercury Free:
Yes
[Ics] Rated Service Breaking Capacity:
65 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 35 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 18 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Net Weight:
2.4 kg
Weight:
2.4 kg
Tightening Torque:
25-25 N.m 95-185 mm² (AWG 3/0...350 kcmil)
Communication Interface:
Modbus
$3,201.00

Description

PowerPacT J-Frame motor circuit protectors (MCP) are instantaneous-trip circuit breakers designed to offer short circuit protection for motors. Additionally, Micrologic 2.2M trip units provide thermal protection for overload and phase unbalance. The unique design of the PowerPacT MCPs accommodates transient motor inrush current without nuisance tripping. These motor protectors accept the same accessories and terminals as the PowerPacT J circuit breakers. This unit has lugs on both the line and load side. This PowerPacT J, 250A, 3 pole, motor protector has a breaking capacity of 25kA at 600VAC. The breaker has a continuous current rating of 80%. PowerPacT J motor circuit protectors comply to UL, CSA, and IEC standards and are CE marked.
View AllClose