Schneider Electric

Schneider Electric JLL36250U33X Circuit breaker, PowerPacT J, 250A, 3 pole, 600VAC, 50kA, lugs, Micrologic 3.2S, 80%

(No reviews yet) Write a Review
SKU:
JLL36250U33X
MPN:
JLL36250U33X
Condition:
New
Ambient Air Temperature For Operation:
-25-70°C
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Eu Rohs Directive:
Compliant with Exemptions
Breaking Capacity:
125 kA 240 V AC 50/60 Hz UL 489 || 100 kA 480 V AC 50/60 Hz UL 489 || 50 kA 600 V AC 50/60 Hz UL 489 || 20 kA 250 V DC UL 489 || 50 kA 500 V DC UL 489
Quality Labels:
CE
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Ambient Air Temperature For Storage:
-50-85°C
Line Rated Current:
250-250 A
Depth:
86 mm
Trip Unit Technology:
electronic, standard, MicroLogic 3.2 S, LSI
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Warranty:
18 months
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Product Or Component Type:
circuit breaker
Protection Type:
overload protection || short-circuit protection
Mounting Support:
lug
Net Weight:
2.4 kg
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Continuous Current Rating:
0.8
Length:
25 mm
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Rohs Exemption Information:
Yes
Suitability For Isolation:
yes IEC 60947-2
Terminal Identifier:
AL250JD
Sustainable Offer Status:
Green Premium product
Control Type:
toggle
Weight:
2.4 kg
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Poles Description:
3P
Electrical Connection:
lugs, line || lugs, load
Network Frequency:
50/60 Hz
Utilisation Category:
category A
Product Certifications:
UL || CSA || NOM
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Tightening Torque:
25-25 N.m 95-185 mm² (AWG 3/0...350 kcmil)
Local Signaling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm 1 LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Ip Degree Of Protection:
front cover IP40
Trip Unit Name:
MicroLogic 3.2 S
Circularity Profile:
ENVEOLI2206032EN
Wire Stripping Length:
25 mm
Pvc Free:
Yes
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Pollution Degree:
3
[Ics] Rated Service Breaking Capacity:
125 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 100 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 50 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 250 V DC IEC 60947-2 || 20 kA 500 V DC IEC 60947-2
Mercury Free:
Yes
Communication Interface:
Modbus
$7,577.00

Description

PowerPacT J-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT J-Frame circuit breakers are available with either thermal magnetic or MicroLogic electronic trip protection units. This PowerPacT J-Frame circuit breaker provides Micrologic Standard with a 3.2S trip unit and an LSI function with a breaking capacity of 50kA at 600VAC. All PowerPacT J-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT J circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has lugs on both the line and load sides. This PowerPacT J, 250A, 3 pole, circuit breaker has a breaking capacity of 50kA at 600VAC. This circuit breaker has a continuous current rating of 80%. PowerPacT J circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose