Schneider Electric

Schneider Electric JRA36250U43X Circuit breaker, PowerPacT J, 250A, 3 pole, 600VAC, 100kA, I-Line, Micrologic 5.2A, 80%, ABC

(No reviews yet) Write a Review
SKU:
JRA36250U43X
MPN:
JRA36250U43X
Condition:
New
Circuit Breaker Application:
HACR rated
Mounting Support:
bracket
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Height:
4.5 in
Tightening Torque:
25-25 N.m 95-185 mm² (AWG 3/0...350 kcmil)
Communication Interface:
Modbus
Product Or Component Type:
circuit breaker
Ambient Air Temperature For Storage:
-50-85°C
Phase Connection:
ABC
Mounting Mode:
I-Line bracket)
Height:
191 mm
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Poles Description:
3P
Breaking Capacity Code:
R
Mounting Height:
4.5 in
Rohs Exemption Information:
Yes
Sustainable Offer Status:
Green Premium product
Net Weight:
2.4 kg
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Quality Labels:
CE
Ambient Air Temperature For Operation:
-25-70°C
Eu Rohs Directive:
Compliant with Exemptions
Continuous Current Rating:
0.8
Circularity Profile:
ENVEOLI2206032EN
Mercury Free:
Yes
Line Rated Current:
250-250 A
Product Certifications:
UL || CSA || NOM
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Suitability For Isolation:
yes IEC 60947-2
Utilisation Category:
category A
Weight:
2.4 kg
Length:
25 mm
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Local Signaling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm 1 LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Pollution Degree:
3
Awg Gauge:
AWG 3/0...350 kcmil aluminium/copper terminals
Breaking Capacity:
200 kA 240 V AC 50/60 Hz UL 489 || 200 kA 480 V AC 50/60 Hz UL 489 || 100 kA 600 V AC 50/60 Hz UL 489
[Ics] Rated Service Breaking Capacity:
150 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 125 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 75 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 690 V AC 50/60 Hz IEC 60947-2
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Electrical Connection:
I-Line connection, line || lugs, load
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Ip Degree Of Protection:
front cover IP40
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Trip Unit Technology:
electronic, ammeter, MicroLogic 5.2 A, LSI
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
Terminal Identifier:
AL250JD
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Protection Type:
overload protection || short-circuit protection
$17,341.50

Description

PowerPacT J-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT J-Frame circuit breakers are available with either thermal magnetic or MicroLogic electronic trip protection units. This PowerPacT J-Frame circuit breaker provides Micrologic Ammeter with a 5.2A trip unit and an LSI function with a breaking capacity of 100kA at 600VAC. All PowerPacT J-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT J circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. PowerPacT J I-Line circuit breakers are available in I-Line construction for easy installation and removal in I-Line applications. This unit has I-Line terminations on the line side and mechanical lugs on the load side. This PowerPacT J, 250A, 3 pole, circuit breaker has a breaking capacity of 100kA at 600VAC. This circuit breaker has a continuous current rating of 80% with an ABC phase connection. PowerPacT J circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose