Schneider Electric

Schneider Electric JRL36250CU31X Circuit breaker, PowerPacT J, 250A, 3 pole, 600VAC, 100kA, lugs, Micrologic 3.2, 100%

(No reviews yet) Write a Review
SKU:
JRL36250CU31X
MPN:
JRL36250CU31X
Condition:
New
Line Rated Current:
250-250 A
Width:
104 mm
Mounting Mode:
unit mount lug)
Ip Degree Of Protection:
front cover IP40
Rohs Exemption Information:
Yes
Breaking Capacity Code:
R
Length:
25 mm
Environmental Disclosure:
ENVPEP2206032EN
Suitability For Isolation:
yes IEC 60947-2
Awg Gauge:
AWG 3/0...350 kcmil aluminium/copper terminals
Tightening Torque:
25-25 N.m 95-185 mm² (AWG 3/0...350 kcmil)
Depth:
86 mm
Long Time Pick-Up Adjustment Range:
0.25...1 x In
Ambient Air Temperature For Operation:
-25-70°C
[Ue] Rated Operational Voltage:
600 V AC 50/60 Hz IEC 60947-3
Trip Unit Technology:
electronic, standard, MicroLogic 3.2, LI
Pvc Free:
Yes
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947-2
Poles Description:
3P
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
[Ics] Rated Service Breaking Capacity:
150 kA 220/240 V AC 50/60 Hz IEC 60947-2 || 125 kA 380/440/415 V AC 50/60 Hz IEC 60947-2 || 75 kA 500/525 V AC 50/60 Hz IEC 60947-2 || 20 kA 690 V AC 50/60 Hz IEC 60947-2
Standards:
UL || CSA || NEMA || NOM-003-SCFI-2000 || IEC 60947-2
California Proposition 65:
WARNING: This product can expose you to chemicals including: DINP, which is known to the State of California to cause cancer, and DIDP, which is known to the State of California to cause birth defects or other reproductive harm. For more information
Electrical Connection:
lugs, line || lugs, load
Continuous Current Rating:
1
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Wire Stripping Length:
25 mm
Network Frequency:
50/60 Hz
Pollution Degree:
3
Protection Type:
overload protection || short-circuit protection
Quality Labels:
CE
Operating Altitude:
< 6561.68 ft (2000 m) without derating || 5000 m with derating
Trip Unit Name:
MicroLogic 3.2
Local Signaling:
ready 1 LED green) || alarm 1 LED 90 % Ir orange) || alarm 1 LED 105 % Ir red) || switched off (OFF) 1 trip indicator green)
Circularity Profile:
ENVEOLI2206032EN
Product Certifications:
UL || CSA || NOM
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Net Weight:
2.4 kg
Utilisation Category:
category A
Ambient Air Temperature For Storage:
-50-85°C
Breaking Capacity:
200 kA 240 V AC 50/60 Hz UL 489 || 200 kA 480 V AC 50/60 Hz UL 489 || 100 kA 600 V AC 50/60 Hz UL 489
Control Type:
toggle
Terminal Identifier:
AL250JD
Country of Origin:
United States
Number Of Slots:
2 auxiliary switch OF plug-in) || 1 alarm switch SD plug-in) || 1 overcurrent trip switch SDE plug-in) || 1 voltage release MN or MX plug-in)
Mounting Support:
lug
[Ui] Rated Insulation Voltage:
750 V IEC 60947-2
Eu Rohs Directive:
Compliant with Exemptions
$11,265.00

Description

PowerPacT J-Frame circuit breakers are designed to protect electrical systems from damage caused by overloads and short circuits. PowerPacT J-Frame circuit breakers are available with either thermal magnetic or MicroLogic electronic trip protection units. This PowerPacT J-Frame circuit breaker provides Micrologic Standard with a 3.2 trip unit and an LI function with a breaking capacity of 100kA at 600VAC. All PowerPacT J-Frame circuit breakers are equipped with dual-break rotating contacts that reduce the amount of peak current during a short circuit fault. All PowerPacT circuit breakers have an integral push-to-trip button in the cover to manually trip the circuit breaker. PowerPacT J circuit breakers are available in 2 and 3-pole unit mount and I-Line constructions. This breaker has lugs on both the line and load sides. This PowerPacT J, 250A, 3 pole, circuit breaker has a breaking capacity of 100kA at 600VAC. This circuit breaker has a continuous current rating of 100%. PowerPacT J circuit breakers comply to UL, CSA, NOM, and IEC standards and are CE marked.
View AllClose