Schneider Electric LC1D098E7 IEC contactor, TeSys Deca, nonreversing, 20A resistive, 4 pole, 2 NO and 2 NC, 48VAC 50/60Hz coil, open style
Schneider Electric
$130.80
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric LC1D098E7 IEC contactor, TeSys Deca, nonreversing, 20A resistive, 4 pole, 2 NO and 2 NC, 48VAC 50/60Hz coil, open style
TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 20A resistive load rating. Contactor is supplied with a 48 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Pressure wire connectors are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
- Environmental Disclosure:
- ENVPEP1501004
- Toxic Heavy Metal Free:
- Yes
- Compatibility Code:
- LC1D
- Heat Dissipation:
- 2-3 W at 50/60 Hz
- Mounting Support:
- plate || rail
- Product Or Component Type:
- contactor
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Climatic Withstand:
- IACS E10 exposure to damp heat || IEC 60947-1 Annex Q category D exposure to damp heat
- Permissible Ambient Air Temperature Around The Device:
- -40-60°C || 60-70°C with derating
- Width:
- 45 mm
- Minimum Switching Voltage:
- 17 V for Signaling circuit
- Control Circuit Type:
- AC 50/60 Hz
- Operating Time:
- 12...22 ms closing || 4...19 ms opening
- Safety Reliability Level:
- B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
- Flame Retardance:
- V1 conforming to UL 94
- Auxiliary Contacts Type:
- mechanically linked 1 NO + 1 NC IEC 60947-5-1 || mirror contact 1 NC IEC 60947-4-1
- Overvoltage Category:
- III
- Product Certifications:
- UL || CCC || CSA || UKCA || EAC || CB || EU-RO-MR by DNV-GL
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Control Circuit Voltage Limits:
- 0.3...0.6 Uc -40-60°C drop-out AC 50/60 Hz || 0.8...1.1 Uc -40-60°C operational AC 50 Hz || 0.85...1.1 Uc -40-60°C operational AC 60 Hz
- Operating Altitude:
- 0...9842.52 ft (0...3000 m)
- Tightening Torque:
- power circuit 1.7 N.m screw clamp terminals flat Ø 6 mm || power circuit 1.7 N.m screw clamp terminals Philips No 2 || control circuit 1.7 N.m screw clamp terminals flat Ø 6 mm || control circuit 1.7 N.m screw clamp terminals Philips No 2 || contro
- Country of Origin:
- Indonesia
- Net Weight:
- 0.365 kg
- [Ue] Rated Operational Voltage:
- power circuit <= 690 V AC 25...400 Hz || power circuit <= 250 V DC
- [Ie] Rated Operational Current:
- 20 A (at <60°C) at <= 440 V AC AC-1 for power circuit
- Inrush Power In Va:
- 70-70 VA 60 Hz cos phi 0.75 (at 20°C) || 70-70 VA 50 Hz cos phi 0.75 (at 20°C)
- Connections - Terminals:
- power circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: flexible without cable end || power circuit: screw clamp terminals 2 1-4 mm² - cable stiffness: flexible without cable end || power circuit: screw clamp terminals 1 1-4 mm² - cable
- [Ui] Rated Insulation Voltage:
- power circuit 690 V IEC 60947-4-1 || power circuit 600 V CSA || power circuit 600 V UL || Signaling circuit 690 V IEC 60947-1 || Signaling circuit 600 V CSA || Signaling circuit 600 V UL
- Depth:
- 92 mm
- Protective Treatment:
- THIEC 60068-2-30
- Device Short Name:
- LC1D
- Irms Rated Making Capacity:
- 250 A at 440 V for power circuit conforming to IEC 60947 || 140 A AC for Signaling circuit conforming to IEC 60947-5-1 || 250 A DC for Signaling circuit conforming to IEC 60947-5-1
- Poles Description:
- 4P
- Fire Resistance:
- 850°C IEC 60695-2-1
- Ip Degree Of Protection:
- IP20 front face IEC 60529
- Minimum Switching Current:
- 5 mA for Signaling circuit
- Contactor Application:
- resistive load
- Mercury Free:
- Yes
- Utilisation Category:
- AC-1 || AC-3 || AC-3e || AC-4
- Protective Cover:
- with
- China Rohs Regulation:
- Pro-active China RoHS declaration (out of China RoHS legal scope)
- [Uimp] Rated Impulse Withstand Voltage:
- 6 kV IEC 60947
- [Ith] Conventional Free Air Thermal Current:
- 20 A (at 60°C) for power circuit || 10 A (at 60°C) for Signaling circuit
- Associated Fuse Rating:
- 10 A gG for Signaling circuit conforming to IEC 60947-5-1 || 25 A gG at <= 690 V coordination type 1 for power circuit || 20 A gG at <= 690 V coordination type 2 for power circuit
- Insulation Resistance:
- > 10 MOhm for Signaling circuit
- Signaling Circuit Frequency:
- 25...400 Hz
