Schneider Electric LC1D115004M7 IEC contactor, TeSys Deca, nonreversing, 200A resistive, 4 pole, 4 NO, 220VAC 50/60Hz coil, open style
Schneider Electric
$673.00
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric LC1D115004M7 IEC contactor, TeSys Deca, nonreversing, 200A resistive, 4 pole, 4 NO, 220VAC 50/60Hz coil, open style
TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 200A resistive load rating. Contactor is supplied with a 220 VAC 50/60 Hz coil. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 6.22 inches tall, 5.91 inches wide and 5.20 inches deep. It weighs 6.31 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
- Coil Technology:
- built-in bidirectional peak limiting diode suppressor
- Pollution Degree:
- 3
- Connections - Terminals:
- control circuit: screw clamp terminals 2 1-2.5 mm² - cable stiffness: flexible with cable end || control circuit: screw clamp terminals 1 1-2.5 mm² - cable stiffness: flexible with cable end || control circuit: screw clamp terminals 1 1-2.5 mm² -
- Standards:
- CSA C22.2 No 14 || EN 60947-4-1 || EN 60947-5-1 || IEC 60947-4-1 || IEC 60947-5-1 || UL 508
- Rated Breaking Capacity:
- 1100 A at 440 V for power circuit conforming to IEC 60947
- Sustainable Offer Status:
- Green Premium product
- Net Weight:
- 2.86 kg
- Tightening Torque:
- control circuit 1.2 N.m screw clamp terminals flat Ø 6 mm || control circuit 1.2 N.m screw clamp terminals Philips No 2 || power circuit 12 N.m connector hexagonal 4 mm || control circuit 1.2 N.m screw clamp terminals pozidriv No 2
- Width:
- 150 mm
- Average Impedance:
- 0.6 mOhm - Ith 200 A 50 Hz for power circuit
- Mounting Support:
- rail || plate
- Overvoltage Category:
- III
- [Ie] Rated Operational Current:
- 200 A (at <60°C) at <= 440 V AC AC-1 for power circuit
- Compatibility Code:
- LC1D
- [Uimp] Rated Impulse Withstand Voltage:
- 8 kV IEC 60947
- China Rohs Regulation:
- Product out of China RoHS scope. Substance declaration for your information.
- Mechanical Robustness:
- vibrations contactor open 2 Gn, 5...300 Hz) || vibrations contactor closed 4 Gn, 5...300 Hz) || shocks contactor closed 15 Gn for 11 ms) || shocks contactor open 6 Gn for 11 ms)
- Fire Resistance:
- 850°C IEC 60695-2-1
- Product Or Component Type:
- contactor
- Mercury Free:
- Yes
- Environmental Disclosure:
- ENVPEP060301EN
- Contactor Application:
- resistive load
- Device Short Name:
- LC1D
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Hold-In Power Consumption In Va:
- 2-18 VA 60 Hz cos phi 0.3 (at 20°C) || 2-18 VA 50 Hz cos phi 0.3 (at 20°C)
- [Icw] Rated Short-Time Withstand Current:
- 250 A 40°C - 10 min for power circuit || 550 A 40°C - 1 min for power circuit || 950 A 40°C - 10 s for power circuit || 1100 A 40°C - 1 s for power circuit
- Weight:
- 2.86 kg
- Country of Origin:
- Czechia
- Safety Reliability Level:
- B10d = 684932 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 10000000 cycles contactor with mechanical load EN/ISO 13849-1
- Permissible Ambient Air Temperature Around The Device:
- -40-60°C || 60-70°C with derating
- Flame Retardance:
- V1 conforming to UL 94
- Height:
- 158 mm
- [Ui] Rated Insulation Voltage:
- power circuit 600 V CSA || power circuit 600 V UL || power circuit 1000 V IEC 60947-4-1
- Operating Time:
- 6...20 ms opening || 20...50 ms closing
- Protective Cover:
- with
- Maximum Operating Rate:
- 2400 cyc/h 60°C
- Range Of Product:
- TeSys Deca
- Product Certifications:
- CCC || RINA || GOST || UL || CSA || LROS (Lloyds register of shipping) || BV || GL || DNV || UKCA
- Irms Rated Making Capacity:
- 1260 A at 440 V for power circuit conforming to IEC 60947
- Range:
- TeSys
- Ip Degree Of Protection:
- IP20 front face IEC 60529
- Rohs Exemption Information:
- Yes
- Operating Altitude:
- 0...9842.52 ft (0...3000 m)
- Heat Dissipation:
- 3-8 W at 50/60 Hz
- [Ue] Rated Operational Voltage:
- power circuit <= 1000 V AC 25...400 Hz || power circuit <= 460 V DC
- Utilisation Category:
- AC-1 || AC-3 || AC-3e || AC-4
- Control Circuit Type:
- AC 50/60 Hz
- Protective Treatment:
- THIEC 60068-2-30
- Eu Rohs Directive:
- Compliant with Exemptions
