Schneider Electric LC1D128EL IEC contactor, TeSys Deca, nonreversing, 25A resistive, 4 pole, 2 NO and 2 NC, low consumption 48VDC coil, open style
Schneider Electric
$206.40
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric LC1D128EL IEC contactor, TeSys Deca, nonreversing, 25A resistive, 4 pole, 2 NO and 2 NC, low consumption 48VDC coil, open style
TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 25A resistive load rating. Contactor is supplied with a low consumption 48 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.90 inches deep. It weighs 1.16 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
- Auxiliary Contacts Type:
- mechanically linked 1 NO + 1 NC IEC 60947-5-1 || mirror contact 1 NC IEC 60947-4-1
- Auxiliary Contact Composition:
- 1 NO + 1 NC
- Country of Origin:
- France
- China Rohs Regulation:
- Product out of China RoHS scope. Substance declaration for your information.
- Non-Overlap Time:
- 1.5 ms on de-energisation between NC and NO contact || 1.5 ms on energisation between NC and NO contact
- [Ui] Rated Insulation Voltage:
- power circuit 690 V IEC 60947-4-1 || power circuit 600 V CSA || power circuit 600 V UL || Signaling circuit 690 V IEC 60947-1 || Signaling circuit 600 V CSA || Signaling circuit 600 V UL
- Protective Cover:
- with
- [Icw] Rated Short-Time Withstand Current:
- 105 A 40°C - 10 s for power circuit || 210 A 40°C - 1 s for power circuit || 30 A 40°C - 10 min for power circuit || 61 A 40°C - 1 min for power circuit || 100 A - 1 s for Signaling circuit || 120 A - 500 ms for Signaling circuit || 140 A - 100 ms fo
- Average Impedance:
- 2.5 mOhm - Ith 25 A 50 Hz for power circuit
- Tightening Torque:
- power circuit 1.7 N.m screw clamp terminals flat Ø 6 mm || power circuit 1.7 N.m screw clamp terminals Philips No 2 || control circuit 1.7 N.m screw clamp terminals flat Ø 6 mm || control circuit 1.7 N.m screw clamp terminals Philips No 2 || contro
- Operating Altitude:
- 0...9842.52 ft (0...3000 m)
- Maximum Operating Rate:
- 3600 cyc/h 60°C
- Width:
- 45 mm
- Operating Time:
- 77±15 % ms closing || 25±20 % ms opening
- Coil Technology:
- built-in bidirectional peak limiting diode suppressor
- [Ith] Conventional Free Air Thermal Current:
- 25 A (at 60°C) for power circuit || 10 A (at 60°C) for Signaling circuit
- Mechanical Durability:
- 30 Mcycles
- Weight:
- 0.525 kg
- Eu Rohs Directive:
- Compliant with Exemptions
- Pole Contact Composition:
- 2 NO + 2 NC
- Hold-In Power Consumption In W:
- 2.4-2.4 W 20°C
- Time Constant:
- 40 ms
- Compatibility Code:
- LC1D
- Rohs Exemption Information:
- Yes
- Connections - Terminals:
- power circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: flexible without cable end || power circuit: screw clamp terminals 2 1-4 mm² - cable stiffness: flexible without cable end || power circuit: screw clamp terminals 1 1-4 mm² - cable
- Circularity Profile:
- ENVEOLI1102030EN
- Ip Degree Of Protection:
- IP20 front face IEC 60529
- Protective Treatment:
- THIEC 60068-2-30
- Product Or Component Type:
- contactor
- Rated Breaking Capacity:
- 250 A at 440 V for power circuit conforming to IEC 60947
- Associated Fuse Rating:
- 10 A gG for Signaling circuit conforming to IEC 60947-5-1 || 40 A gG at <= 690 V coordination type 1 for power circuit || 25 A gG at <= 690 V coordination type 2 for power circuit
- Control Circuit Type:
- DC low consumption
- Signaling Circuit Frequency:
- 25...400 Hz
- Insulation Resistance:
- > 10 MOhm for Signaling circuit
- Mercury Free:
- Yes
- Poles Description:
- 4P
- Permissible Ambient Air Temperature Around The Device:
- -40-60°C || 60-70°C with derating
- [Uc] Control Circuit Voltage:
- 48 V DC
- Reach Regulation:
- Reference contains Substances of Very High Concern above the threshold
- Warranty:
- 18 months
- Range Of Product:
- TeSys Deca
- Overvoltage Category:
- III
- Height:
- 85 mm
- Contactor Application:
- resistive load
- Climatic Withstand:
- IACS E10 exposure to damp heat || IEC 60947-1 Annex Q category D exposure to damp heat
- Pollution Degree:
- 3
- Depth:
- 99 mm
- Utilisation Category:
- AC-1 || AC-3 || AC-3e || AC-4
- Device Short Name:
- LC1D
