Schneider Electric

Schneider Electric LC1D150Q7 IEC contactor, TeSys Deca, nonreversing, 150A, 100HP at 480VAC, up to 100kA SCCR, 3 phase, 3 NO, 380VAC 50/60Hz coil, open

(No reviews yet) Write a Review
SKU:
LC1D150Q7
MPN:
LC1D150Q7
Condition:
New
Protective Cover:
with
Auxiliary Contact Composition:
1 NO + 1 NC
Environmental Disclosure:
ENVPEP060301EN
Associated Fuse Rating:
10 A gG for Signaling circuit conforming to IEC 60947-5-1 || 315 A gG at <= 690 V coordination type 1 for power circuit || 250 A gG at <= 690 V coordination type 2 for power circuit
Flame Retardance:
V1 conforming to UL 94
[Ie] Rated Operational Current:
200 A (at <60°C) at <= 440 V AC AC-1 for power circuit || 150 A (at <60°C) at <= 440 V AC AC-3 for power circuit || 150 A (at <60°C) at <= 440 V AC AC-3e for power circuit
Product Or Component Type:
contactor
Coil Technology:
built-in bidirectional peak limiting diode suppressor
Range Of Product:
TeSys Deca
Insulation Resistance:
> 10 MOhm for Signaling circuit
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Rohs Exemption Information:
Yes
Range:
TeSys
Average Impedance:
0.6 mOhm - Ith 200 A 50 Hz for power circuit
Compatibility Code:
LC1D
Mechanical Robustness:
vibrations contactor open 2 Gn, 5...300 Hz) || vibrations contactor closed 4 Gn, 5...300 Hz) || shocks contactor closed 15 Gn for 11 ms) || shocks contactor open 6 Gn for 11 ms)
[Uc] Control Circuit Voltage:
380 V AC 50/60 Hz
Utilisation Category:
AC-3 || AC-4 || AC-1 || AC-3e
Electrical Durability:
0.85 Mcycles 150 A AC-3 <= 440 V || 1 Mcycles 200 A AC-1 <= 440 V || 0.85 Mcycles 150 A AC-3e <= 440 V
Safety Reliability Level:
B10d = 684932 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 10000000 cycles contactor with mechanical load EN/ISO 13849-1
Control Circuit Type:
AC 50/60 Hz
Tightening Torque:
control circuit 1.2 N.m screw clamp terminals flat Ø 6 mm || control circuit 1.2 N.m screw clamp terminals Philips No 2 || power circuit 12 N.m connector hexagonal 4 mm || control circuit 1.2 N.m screw clamp terminals pozidriv No 2
[Ue] Rated Operational Voltage:
power circuit <= 1000 V AC 25...400 Hz || power circuit <= 300 V DC
Width:
120 mm
[Uimp] Rated Impulse Withstand Voltage:
8 kV IEC 60947
Inrush Power In Va:
280-350 VA 60 Hz cos phi 0.9 (at 20°C) || 280-350 VA 50 Hz cos phi 0.9 (at 20°C)
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Country of Origin:
Czechia
Rated Breaking Capacity:
1400 A at 440 V for power circuit conforming to IEC 60947
Pvc Free:
Yes
Mechanical Durability:
8 Mcycles
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Minimum Switching Voltage:
17 V for Signaling circuit
Warranty:
18 months
Motor Power Kw:
40 kW at 220...230 V AC 50/60 Hz (AC-3) || 75 kW at 380...400 V AC 50/60 Hz (AC-3) || 80 kW at 415...440 V AC 50/60 Hz (AC-3) || 90 kW at 500 V AC 50/60 Hz (AC-3) || 100 kW at 660...690 V AC 50/60 Hz (AC-3) || 75 kW at 1000 V AC 50/60 Hz (AC-3) || 22
Minimum Switching Current:
5 mA for Signaling circuit
Product Certifications:
UL || CCC || CSA || CE || UKCA || Marine || EAC
Climatic Withstand:
IACS E10 exposure to damp heat
Operating Altitude:
0...9842.52 ft (0...3000 m)
Sustainable Offer Status:
Green Premium product
Contactor Application:
motor control || resistive load
Device Short Name:
LC1D
Operating Time:
20...35 ms closing || 40...75 ms opening
Protective Treatment:
THIEC 60068-2-30
Signaling Circuit Frequency:
25...400 Hz
Power Dissipation Per Pole:
24 W AC-1 || 13.5 W AC-3 || 13.5 W AC-3e
Maximum Operating Rate:
1200 cyc/h 60°C
$696.00

Description

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 150A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 40HP at 200 to 208VAC, 50HP at 240VAC, 100HP at 480VAC and 125HP at 600VAC three phase. When used with a 480VAC up to 250A circuit breaker, this contactor can have a SCCR up to 100kA. When used with up to a 600VAC 300A Class J or CC fuse, this contactor can have a SCCR up to 100kA. Contactor is supplied with a 380 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 6.22 inches tall, 4.72 inches wide and 5.35 inches deep. It weighs 5.51 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
View AllClose