Schneider Electric

Schneider Electric LC1D256F7 IEC contactor, TeSys Deca, nonreversing, 25A, 15HP at 480VAC, 3 phase, 3 pole, 3 NO, 110VAC 50/60Hz coil, open style

(No reviews yet) Write a Review

Write a Review

Schneider Electric

Schneider Electric LC1D256F7 IEC contactor, TeSys Deca, nonreversing, 25A, 15HP at 480VAC, 3 phase, 3 pole, 3 NO, 110VAC 50/60Hz coil, open style

Rating Required Select Rating 1 star (worst) 2 stars 3 stars (average) 4 stars 5 stars (best)

Name

Email Required

Review Subject Required

Comments Required

SKU:

LC1D256F7

UPC:

MPN:

LC1D256F7

Condition:

New

Control Circuit Type:

AC 50/60 Hz

Weight:

0.37 kg

Flame Retardance:

V1 conforming to UL 94

[Ith] Conventional Free Air Thermal Current:

10 A (at 60°C) for Signaling circuit || 40 A (at 60°C) for power circuit

Pole Contact Composition:

3 NO

[Uc] Control Circuit Voltage:

110 V AC 50/60 Hz

Rated Breaking Capacity:

450 A at 440 V for power circuit conforming to IEC 60947

Rohs Exemption Information:

Yes

Average Impedance:

2 mOhm - Ith 40 A 50 Hz for power circuit

Pollution Degree:

3

Sustainable Offer Status:

Green Premium product

Eu Rohs Directive:

Compliant

Minimum Switching Voltage:

17 V for Signaling circuit

Net Weight:

0.37 kg

Ip Degree Of Protection:

IP20 front face IEC 60529

Device Short Name:

LC1D

Operating Altitude:

0...9842.52 ft (0...3000 m)

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Maximum Operating Rate:

3600 cyc/h 60°C

Contactor Application:

resistive load || motor control

Width:

45 mm

Control Circuit Voltage Limits:

0.3...0.6 Uc -40-70°C drop-out AC 50/60 Hz || 0.8...1.1 Uc -40-60°C operational AC 50 Hz || 0.85...1.1 Uc -40-60°C operational AC 60 Hz || 1...1.1 Uc 60-70°C operational AC 50/60 Hz

Inrush Power In Va:

70-70 VA 60 Hz cos phi 0.75 (at 20°C) || 70-70 VA 50 Hz cos phi 0.75 (at 20°C)

Range Of Product:

TeSys Deca

Mechanical Durability:

15 Mcycles

Auxiliary Contact Composition:

1 NO + 1 NC

Protective Treatment:

THIEC 60068-2-30

Mounting Support:

plate || rail

[Uimp] Rated Impulse Withstand Voltage:

6 kV IEC 60947

Utilisation Category:

AC-1 || AC-3 || AC-4 || AC-3e

Standards:

CSA C22.2 No 14 || EN 60947-4-1 || EN 60947-5-1 || IEC 60947-4-1 || IEC 60947-5-1 || UL 508 || IEC 60335-1

Circularity Profile:

ENVEOLI110229EN

Height:

85 mm

Overvoltage Category:

III

Irms Rated Making Capacity:

140 A AC for Signaling circuit conforming to IEC 60947-5-1 || 250 A DC for Signaling circuit conforming to IEC 60947-5-1 || 450 A at 440 V for power circuit conforming to IEC 60947

[Icw] Rated Short-Time Withstand Current:

240 A 40°C - 10 s for power circuit || 380 A 40°C - 1 s for power circuit || 50 A 40°C - 10 min for power circuit || 120 A 40°C - 1 min for power circuit || 100 A - 1 s for Signaling circuit || 120 A - 500 ms for Signaling circuit || 140 A - 100 ms f

Product Certifications:

GL || BV || DNV || LROS (Lloyds register of shipping) || RINA || UL || CCC || CSA || GOST || UKCA || CB

Tightening Torque:

control circuit 1.7 N.m lugs-ring terminals flat Ø 6 mm M3.5 || control circuit 1.7 N.m lugs-ring terminals Philips No 2 M3.5 || power circuit 2.5 N.m lugs-ring terminals flat Ø 8 mm M4 || power circuit 2.5 N.m lugs-ring terminals Philips No 2 M4 |

[Ue] Rated Operational Voltage:

power circuit <= 690 V AC 25...400 Hz || power circuit <= 300 V DC

Power Dissipation Per Pole:

3.2 W AC-1 || 1.25 W AC-3 || 1.25 W AC-3e

Auxiliary Contacts Type:

mechanically linked 1 NO + 1 NC IEC 60947-5-1 || mirror contact 1 NC IEC 60947-4-1

Product Or Component Type:

contactor

Permissible Ambient Air Temperature Around The Device:

-40-60°C || 60-70°C with derating

Operating Time:

12...22 ms closing || 4...19 ms opening

Hold-In Power Consumption In Va:

7.5-7.5 VA 60 Hz cos phi 0.3 (at 20°C) || 7-7 VA 50 Hz cos phi 0.3 (at 20°C)

Environmental Disclosure:

ENVPEP110229EN

Connections - Terminals:

control circuit: lugs-ring terminals - external diameter: 8 mm || power circuit: lugs-ring terminals - external diameter: 10 mm

[Ie] Rated Operational Current:

25 A (at <60°C) at <= 440 V AC AC-3 for power circuit || 40 A (at <60°C) at <= 440 V AC AC-1 for power circuit || 25 A (at <60°C) at <= 440 V AC AC-3e for power circuit

Poles Description:

3P