Schneider Electric

Schneider Electric LC1D326BLS207 IEC contactor, TeSys D, nonreversing, 32A, 20HP at 480VAC, 3 phase, 3 pole, 3 NO, low consumption 24VDC coil, open style

(No reviews yet) Write a Review
SKU:
LC1D326BLS207
MPN:
LC1D326BLS207
Condition:
New
Mechanical Robustness:
vibrations contactor open 2 Gn, 5...300 Hz) || vibrations contactor closed 4 Gn, 5...300 Hz) || shocks contactor closed 15 Gn for 11 ms) || shocks contactor open 8 Gn for 11 ms)
Environmental Disclosure:
ENVPEP2205004
Pole Contact Composition:
3 NO
Non-Overlap Time:
1.5 ms on de-energisation between NC and NO contact || 1.5 ms on energisation between NC and NO contact
Product Certifications:
IEC || CCC || EAC || UA || TR || UKCA || CB
Standards:
EN/IEC 60947-4-1 || EN/IEC 60947-5-1 || EN 45545: R22 HL3 || EN 45545: R26 HL3 || DIN 5510-2
Mounting Support:
rail || plate
Operating Time:
77±15 % ms closing || 25±20 % ms opening
Maximum Operating Rate:
3600 cyc/h 60°C
Protective Cover:
with
[Ie] Rated Operational Current:
32 A (at <60°C) at <= 440 V AC AC-3 for power circuit || 50 A (at <60°C) at <= 440 V AC AC-1 for power circuit || 32 A (at <60°C) at <= 440 V AC AC-3e for power circuit
Power Dissipation Per Pole:
2 W AC-3 || 5 W AC-1 || 2 W AC-3e
Depth:
101 mm
Auxiliary Contact Composition:
1 NO + 1 NC
Pvc Free:
Yes
[Ue] Rated Operational Voltage:
power circuit <= 690 V AC 25...400 Hz
Warranty:
18 months
Connections - Terminals:
control circuit: lugs-ring terminals - external diameter: 8 mm || power circuit: lugs-ring terminals - external diameter: 12 mm
Electrical Durability:
1.65 Mcycles 32 A AC-3 <= 440 V || 1.4 Mcycles 50 A AC-1 <= 440 V || 1.65 Mcycles 32 A AC-3e <= 440 V
Insulation Resistance:
> 10 MOhm for Signaling circuit
Climatic Withstand:
IACS E10 || IEC 60947-1 Annex Q category D
Time Constant:
37 ms
Sustainable Offer Status:
Green Premium product
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Mercury Free:
Yes
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Width:
45 mm
Weight:
0.375 kg
Minimum Switching Current:
5 mA for Signaling circuit
Contactor Application:
resistive load || motor control
Control Circuit Type:
DC low consumption
Overvoltage Category:
III
Tightening Torque:
control circuit 1.7 N.m lugs-ring terminals flat Ø 6 mm M3.5 || control circuit 1.7 N.m lugs-ring terminals Philips No 2 M3.5 || power circuit 2.5 N.m lugs-ring terminals Philips No 2 M4 || power circuit 2.5 N.m lugs-ring terminals flat Ø 6 mm M4
Auxiliary Contacts Type:
mechanically linked 1 NO + 1 NC IEC 60947-5-1 || mirror contact 1 NC IEC 60947-4-1
Ambient Air Temperature For Storage:
-60-80°C
Net Weight:
0.375 kg
Associated Fuse Rating:
10 A gG for Signaling circuit conforming to IEC 60947-5-1 || 63 A gG at <= 690 V coordination type 1 for power circuit || 63 A gG at <= 690 V coordination type 2 for power circuit
Compatibility Code:
LC1D
Inrush Power In W:
4-4 W 20°C)
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Rated Breaking Capacity:
550 A at 440 V for power circuit conforming to IEC 60947
Eu Rohs Directive:
Compliant with Exemptions
Poles Description:
3P
[Uimp] Rated Impulse Withstand Voltage:
6 kV IEC 60947
Rohs Exemption Information:
Yes
Mechanical Durability:
30 Mcycles
Country of Origin:
France
$270.96

Description

This TeSys D contactor has been designed for motor control in railway applications. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 32A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 7.5HP at 200 to 208VAC, 10HP at 240VAC, 20HP at 480VAC and 30HP at 600VAC three phase. Contactor is also rated for 2HP at 115VAC and 5HP at 240VAC single phase. Contactor is supplied with a low consumption 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Ring-lug screw terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.98 inches deep. It weighs 1.18 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
View AllClose