Schneider Electric

Schneider Electric LC1D386BL IEC contactor, TeSys Deca, nonreversing, 38A, 20HP at 480VAC, 3 phase, 3 pole, 3 NO, low consumption, 24VDC coil, open

(No reviews yet) Write a Review

Write a Review

Schneider Electric

Schneider Electric LC1D386BL IEC contactor, TeSys Deca, nonreversing, 38A, 20HP at 480VAC, 3 phase, 3 pole, 3 NO, low consumption, 24VDC coil, open

Rating Required Select Rating 1 star (worst) 2 stars 3 stars (average) 4 stars 5 stars (best)

Name

Email Required

Review Subject Required

Comments Required

SKU:

LC1D386BL

UPC:

MPN:

LC1D386BL

Condition:

New

Associated Fuse Rating:

10 A gG for Signaling circuit conforming to IEC 60947-5-1 || 63 A gG at <= 690 V coordination type 1 for power circuit || 63 A gG at <= 690 V coordination type 2 for power circuit

Mechanical Robustness:

vibrations contactor open 2 Gn, 5...300 Hz) || vibrations contactor closed 4 Gn, 5...300 Hz) || shocks contactor closed 15 Gn for 11 ms) || shocks contactor open 8 Gn for 11 ms)

Auxiliary Contacts Type:

mechanically linked 1 NO + 1 NC IEC 60947-5-1 || mirror contact 1 NC IEC 60947-4-1

Product Or Component Type:

contactor

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Rated Breaking Capacity:

550 A at 440 V for power circuit conforming to IEC 60947

Maximum Horse Power Rating:

10 hp at 230/240 V AC 50/60 Hz for 3 phase motors || 10 hp at 200/208 V AC 50/60 Hz for 3 phase motors || 5 hp at 240 V AC 50/60 Hz for 1 phase motors || 20 hp at 480 V AC 50/60 Hz for 3 phase motors || 25 hp at 600 V AC 50/60 Hz for 3 phase motors

Maximum Operating Rate:

3600 cyc/h 60°C

[Ith] Conventional Free Air Thermal Current:

10 A (at 60°C) for Signaling circuit || 50 A (at 60°C) for power circuit

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

Pole Contact Composition:

3 NO

Pollution Degree:

3

Hold-In Power Consumption In W:

2.4-2.4 W 20°C

Average Impedance:

2 mOhm - Ith 50 A 50 Hz for power circuit

Coil Technology:

built-in bidirectional peak limiting diode suppressor

Standards:

CSA C22.2 No 14 || EN 60947-4-1 || EN 60947-5-1 || IEC 60947-4-1 || IEC 60947-5-1 || UL 508 || IEC 60335-1

Insulation Resistance:

> 10 MOhm for Signaling circuit

[Icw] Rated Short-Time Withstand Current:

60 A 40°C - 10 min for power circuit || 430 A 40°C - 1 s for power circuit || 150 A 40°C - 1 min for power circuit || 310 A 40°C - 10 s for power circuit || 100 A - 1 s for Signaling circuit || 120 A - 500 ms for Signaling circuit || 140 A - 100 ms f

Eu Rohs Directive:

Compliant with Exemptions

Auxiliary Contact Composition:

1 NO + 1 NC

Device Short Name:

LC1D

Non-Overlap Time:

1.5 ms on de-energisation between NC and NO contact || 1.5 ms on energisation between NC and NO contact

Utilisation Category:

AC-4 || AC-1 || AC-3 || AC-3e

Compatibility Code:

LC1D

Minimum Switching Current:

5 mA for Signaling circuit

Range Of Product:

TeSys Deca

Climatic Withstand:

IACS E10 exposure to damp heat || IEC 60947-1 Annex Q category D exposure to damp heat

Protective Treatment:

THIEC 60068-2-30

Rohs Exemption Information:

Yes

[Uimp] Rated Impulse Withstand Voltage:

6 kV IEC 60947

Control Circuit Type:

DC low consumption

Flame Retardance:

V1 conforming to UL 94

Mounting Support:

rail || plate

China Rohs Regulation:

Product out of China RoHS scope. Substance declaration for your information.

Minimum Switching Voltage:

17 V for Signaling circuit

Electrical Durability:

1.4 Mcycles 50 A AC-1 <= 440 V || 1.4 Mcycles 38 A AC-3 <= 440 V || 1.4 Mcycles 38 A AC-3e <= 440 V

Control Circuit Voltage Limits:

0.1...0.3 Uc -40-70°C drop-out DC || 0.8...1.25 Uc -40-60°C operational DC || 1...1.25 Uc 60-70°C operational DC

[Ue] Rated Operational Voltage:

power circuit <= 690 V AC 25...400 Hz || power circuit <= 300 V DC

Operating Altitude:

0...9842.52 ft (0...3000 m)

Fire Resistance:

850°C IEC 60695-2-1

Contactor Application:

motor control || resistive load

Connections - Terminals:

control circuit: lugs-ring terminals - external diameter: 8 mm || power circuit: lugs-ring terminals - external diameter: 10 mm

Product Certifications:

DNV || GL || CCC || LROS (Lloyds register of shipping) || RINA || BV || GOST || UL || CSA || CB

Tightening Torque:

control circuit 1.7 N.m lugs-ring terminals flat Ø 6 mm M3.5 || control circuit 1.7 N.m lugs-ring terminals Philips No 2 M3.5 || power circuit 2.5 N.m lugs-ring terminals flat Ø 8 mm M4 || power circuit 2.5 N.m lugs-ring terminals Philips No 2 M4 |

Mechanical Durability:

30 Mcycles