Schneider Electric

Schneider Electric LC1D40008B7 IEC contactor, TeSys Deca, nonreversing, 60A resistive, 4 pole, 2 NO and 2 NC, 24VAC 50/60Hz coil, open style

(No reviews yet) Write a Review
SKU:
LC1D40008B7
MPN:
LC1D40008B7
Condition:
New
Toxic Heavy Metal Free:
Yes
Operating Altitude:
0...9842.52 ft (0...3000 m)
Mechanical Durability:
6 Mcycles
Standards:
CSA C22.2 No 14 || EN 60947-4-1 || EN 60947-5-1 || IEC 60947-4-1 || IEC 60947-5-1 || UL 508
[Ie] Rated Operational Current:
60 A (at <60°C) at <= 440 V AC AC-1 for power circuit
Overvoltage Category:
III
Power Dissipation Per Pole:
5.4 W AC-1
Eu Rohs Directive:
Compliant
Flame Retardance:
V1 conforming to UL 94
Protective Cover:
without
Mounting Support:
rail || plate
Weight:
1.44 kg
Irms Rated Making Capacity:
800 A at 440 V for power circuit conforming to IEC 60947
Contactor Application:
resistive load
Compatibility Code:
LC1D
Associated Fuse Rating:
80 A gG at <= 690 V coordination type 1 for power circuit || 80 A gG at <= 690 V coordination type 2 for power circuit
Operating Time:
4...19 ms opening || 12...26 ms closing
Pole Contact Composition:
2 NO + 2 NC
Reach Regulation:
Free of Substances of Very High Concern above the threshold
Mechanical Robustness:
shocks contactor open 8 Gn for 11 ms) || shocks contactor closed 10 Gn for 11 ms) || vibrations contactor opened 2 Gn, 5...300 Hz) || vibrations contactor closed 4 Gn, 5...300 Hz)
[Uimp] Rated Impulse Withstand Voltage:
6 kV IEC 60947
Coil Technology:
without built-in suppressor module
Range Of Product:
TeSys Deca
Average Impedance:
1.5 mOhm - Ith 60 A 50 Hz for power circuit
Hold-In Power Consumption In Va:
13-13 VA 60 Hz cos phi 0.3 (at 20°C) || 15-15 VA 50 Hz cos phi 0.3 (at 20°C)
Range:
TeSys
Connections - Terminals:
control circuit: screw clamp terminals 2 1-2.5 mm² - cable stiffness: flexible with cable end || control circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: flexible without cable end || control circuit: screw clamp terminals 2 1-4 mm² - c
Net Weight:
1.44 kg
Depth:
125 mm
[Ith] Conventional Free Air Thermal Current:
60 A (at 60°C) for power circuit
Poles Description:
4P
Inrush Power In Va:
140-140 VA 60 Hz cos phi 0.75 (at 20°C) || 160-160 VA 50 Hz cos phi 0.75 (at 20°C)
[Icw] Rated Short-Time Withstand Current:
320 A 40°C - 10 s for power circuit || 720 A 40°C - 1 s for power circuit || 72 A 40°C - 10 min for power circuit || 165 A 40°C - 1 min for power circuit
Climatic Withstand:
IACS E10 exposure to damp heat
Safety Reliability Level:
B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
Maximum Operating Rate:
3600 cyc/h 60°C
Circularity Profile:
N/A
Mercury Free:
Yes
Product Or Component Type:
contactor
Rated Breaking Capacity:
800 A at 440 V for power circuit conforming to IEC 60947
Warranty:
18 months
Environmental Disclosure:
ENVPEP110205EN
Product Certifications:
DNV || LROS (Lloyds register of shipping) || GL || UL || BV || CCC || CSA || GOST || RINA
Country of Origin:
United States
Heat Dissipation:
4-5 W at 50/60 Hz
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
$496.80

Description

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 60A resistive load rating. Contactor is supplied with a 24 VAC 50/60 Hz coil. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 4.92 inches deep. It weighs 3.17 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
View AllClose