Schneider Electric

Schneider Electric LC1D65A6EHE IEC contactor, TeSys Deca Green, nonreversing, 65A, 40HP at 480VAC, 3 phase, 3 pole, 3 NO, 130VAC/VDC coil, open style

(No reviews yet) Write a Review
SKU:
LC1D65A6EHE
MPN:
LC1D65A6EHE
Condition:
New
Device Short Name:
LC1D
Pollution Degree:
3
[Ith] Conventional Free Air Thermal Current:
80 A (at 60°C) for power circuit || 10 A (at 60°C) for Signaling circuit
Non-Overlap Time:
1.5 ms on de-energisation between NC and NO contact || 1.5 ms on energisation between NC and NO contact
Poles Description:
3P
Sustainable Offer Status:
Green Premium product
Permissible Ambient Air Temperature Around The Device:
-40-60°C || 60-70°C with derating
Mechanical Durability:
6 Mcycles
Mounting Support:
rail || plate
Operating Time:
55...65 ms closing || 20...80 ms opening
Control Circuit Type:
AC/DC 50/60 Hz AC/DC electronic
Safety Reliability Level:
B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
Rohs Exemption Information:
Yes
Product Or Component Type:
contactor
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Width:
55 mm
Control Circuit Voltage Limits:
<= 0.1 Uc -40-70°C drop-out AC/DC || 0.85...1.1 Uc -40-60°C operational AC/DC || 1...1.1 Uc 60-70°C operational AC/DC
Signaling Circuit Frequency:
25...400 Hz
Insulation Resistance:
> 10 MOhm for Signaling circuit
Mercury Free:
Yes
Rated Breaking Capacity:
1000 A at 440 V for power circuit conforming to IEC 60947
Weight:
1.002 kg
Associated Fuse Rating:
125 A gG at <= 690 V coordination type 1 for power circuit || 125 A gG at <= 690 V coordination type 2 for power circuit || 10 A gG for Signaling circuit conforming to IEC 60947-5-1
Circularity Profile:
ENVEOLI1607010EN
Auxiliary Contact Composition:
1 NO + 1 NC
[Ie] Rated Operational Current:
80 A (at <60°C) at <= 440 V AC-1 for power circuit || 65 A (at <60°C) at <= 440 V AC-3 for power circuit || 65 A (at <60°C) at <= 440 V AC-3e for power circuit
Contactor Application:
motor control || resistive load
Ip Degree Of Protection:
IP20 front face IEC 60529
Minimum Switching Voltage:
17 V for Signaling circuit
Inrush Power In W:
19-19 W 20°C)
Inrush Power In Va:
23-23 VA 50/60 Hz (at 20°C)
Pole Contact Composition:
3 NO
Net Weight:
1.002 kg
Maximum Operating Rate:
3600 cyc/h 60°C
Flame Retardance:
V1 conforming to UL 94
Utilisation Category:
AC-1 || AC-3 || AC-3e
[Ue] Rated Operational Voltage:
power circuit <= 690 V AC 25...400 Hz
Country of Origin:
France
Mechanical Robustness:
vibrations contactor open 2 Gn, 5...300 Hz) || vibrations contactor closed 4 Gn, 5...300 Hz) || shocks contactor open 10 Gn for 11 ms) || shocks contactor closed 15 Gn for 11 ms)
Warranty:
18 months
[Uimp] Rated Impulse Withstand Voltage:
6 kV IEC 60947
Hold-In Power Consumption In Va:
1.4-1.4 VA 50/60 Hz (at 20°C)
[Ui] Rated Insulation Voltage:
power circuit 690 V IEC 60947-4-1 || Signaling circuit 690 V IEC 60947-1
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Climatic Withstand:
IACS E10 exposure to damp heat || IEC 60947-1 Annex Q category D exposure to damp heat
Maximum Horse Power Rating:
5 hp at 115 V AC 60 Hz for 1 phase motors || 10 hp at 230/240 V AC 60 Hz for 1 phase motors || 20 hp at 200/208 V AC 60 Hz for 3 phase motors || 20 hp at 230/240 V AC 60 Hz for 3 phase motors || 40 hp at 460/480 V AC 60 Hz for 3 phase motors || 50 hp
Overvoltage Category:
III
$403.00

Description

TeSys D Green contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 65A inductive 3 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactors have both Horsepower and Kw motor rating for international acceptance. Contactor is rated for 20HP at 200 to 208VAC, 20HP at 240VAC, 40HP at 480VAC and 50HP at 600VAC three phase. Contactor is also rated for 5HP at 115VAC and 10HP at 240VAC single phase. Equipped with an electronic coil, wide band voltage 48-130V, AC/DC compatible, low consumption. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Ring-lug screw terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.17 inches wide and 4.72 inches deep. It weighs 2.21 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
View AllClose