Schneider Electric LC1DT20U7 IEC contactor, TeSys Deca, nonreversing, 20A resistive, 4 pole, 4 NO, 240VAC 50/60Hz coil, open style
Schneider Electric
$126.00
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric LC1DT20U7 IEC contactor, TeSys Deca, nonreversing, 20A resistive, 4 pole, 4 NO, 240VAC 50/60Hz coil, open style
TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 20A resistive load rating. Contactor is supplied with a 240 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
- Utilisation Category:
- AC-1
- Rohs Exemption Information:
- Yes
- Permissible Ambient Air Temperature Around The Device:
- -40-60°C || 60-70°C with derating
- [Ui] Rated Insulation Voltage:
- power circuit 600 V CSA || power circuit 600 V UL || Signaling circuit 690 V IEC 60947-1 || Signaling circuit 600 V CSA || Signaling circuit 600 V UL || power circuit 690 V IEC 60947-4-1
- Tightening Torque:
- control circuit 1.7 N.m screw clamp terminals flat Ø 6 mm || control circuit 1.7 N.m screw clamp terminals Philips No 2 || power circuit 1.7 N.m screw clamp terminals flat Ø 6 mm || power circuit 1.7 N.m screw clamp terminals Philips No 2 || contro
- Signaling Circuit Frequency:
- 25...400 Hz
- Insulation Resistance:
- > 10 MOhm for Signaling circuit
- Ip Degree Of Protection:
- IP20 front face IEC 60529
- Heat Dissipation:
- 2-3 W at 50/60 Hz
- [Ie] Rated Operational Current:
- 20 A (at <60°C) at <= 440 V AC AC-1 for power circuit
- Overvoltage Category:
- III
- Range Of Product:
- TeSys Deca
- Fire Resistance:
- 850°C IEC 60695-2-1
- Poles Description:
- 4P
- Safety Reliability Level:
- B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
- Height:
- 85 mm
- Circularity Profile:
- ENVEOLI1501004
- Protective Treatment:
- THIEC 60068-2-30
- Minimum Switching Voltage:
- 17 V for Signaling circuit
- Product Or Component Type:
- contactor
- Auxiliary Contacts Type:
- mechanically linked 1 NO + 1 NC IEC 60947-5-1 || mirror contact 1 NC IEC 60947-4-1
- Control Circuit Voltage Limits:
- 0.3...0.6 Uc -40-70°C drop-out AC 50/60 Hz || 0.8...1.1 Uc -40-60°C operational AC 50 Hz || 0.85...1.1 Uc -40-60°C operational AC 60 Hz || 1...1.1 Uc 60-70°C operational AC 50/60 Hz
- Toxic Heavy Metal Free:
- Yes
- Sustainable Offer Status:
- Green Premium product
- Climatic Withstand:
- IACS E10 exposure to damp heat || IEC 60947-1 Annex Q category D exposure to damp heat
- Net Weight:
- 0.365 kg
- Mechanical Durability:
- 15 Mcycles
- [Ith] Conventional Free Air Thermal Current:
- 10 A (at 60°C) for Signaling circuit || 20 A (at 60°C) for power circuit
- Depth:
- 92 mm
- Mounting Support:
- plate || rail
- Pole Contact Composition:
- 4 NO
- Average Impedance:
- 2.5 mOhm - Ith 20 A 50 Hz for power circuit
- Mechanical Robustness:
- vibrations contactor open 2 Gn, 5...300 Hz) || vibrations contactor closed 4 Gn, 5...300 Hz) || shocks contactor closed 15 Gn for 11 ms) || shocks contactor open 10 Gn for 11 ms)
- Country of Origin:
- France
- [Icw] Rated Short-Time Withstand Current:
- 30 A 40°C - 10 min for power circuit || 61 A 40°C - 1 min for power circuit || 105 A 40°C - 10 s for power circuit || 210 A 40°C - 1 s for power circuit || 100 A - 1 s for Signaling circuit || 120 A - 500 ms for Signaling circuit || 140 A - 100 ms fo
- Minimum Switching Current:
- 5 mA for Signaling circuit
- Weight:
- 0.365 kg
- Inrush Power In Va:
- 70-70 VA 60 Hz cos phi 0.75 (at 20°C) || 70-70 VA 50 Hz cos phi 0.75 (at 20°C)
- Protective Cover:
- with
- Connections - Terminals:
- control circuit: screw clamp terminals 2 1-2.5 mm² - cable stiffness: flexible with cable end || control circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: flexible without cable end || control circuit: screw clamp terminals 2 1-4 mm² - c
- Maximum Operating Rate:
- 3600 cyc/h 60°C
- Flame Retardance:
- V1 conforming to UL 94
- Rated Breaking Capacity:
- 250 A at 440 V for power circuit conforming to IEC 60947
- Irms Rated Making Capacity:
- 140 A AC for Signaling circuit conforming to IEC 60947-5-1 || 250 A DC for Signaling circuit conforming to IEC 60947-5-1 || 250 A at 440 V for power circuit conforming to IEC 60947
- [Uimp] Rated Impulse Withstand Voltage:
- 6 kV IEC 60947
- Auxiliary Contact Composition:
- 1 NO + 1 NC
- Compatibility Code:
- LC1D
- Standards:
- CSA C22.2 No 14 || EN 60947-4-1 || EN 60947-5-1 || IEC 60947-4-1 || IEC 60947-5-1 || UL 508 || IEC 60335-1
