Schneider Electric LC1DT25B7 IEC contactor, TeSys Deca, nonreversing, 25A resistive, 4 pole, 4 NO, 24VAC 50/60Hz coil, open style
Schneider Electric
$159.60
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric LC1DT25B7 IEC contactor, TeSys Deca, nonreversing, 25A resistive, 4 pole, 4 NO, 24VAC 50/60Hz coil, open style
TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 25A resistive load rating. Contactor is supplied with a 24 VAC 50/60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 3.35 inches tall, 1.77 inches wide and 3.62 inches deep. It weighs 0.80 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
- Overvoltage Category:
- III
- Safety Reliability Level:
- B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
- Insulation Resistance:
- > 10 MOhm for Signaling circuit
- [Ue] Rated Operational Voltage:
- power circuit <= 690 V AC 25...400 Hz || power circuit <= 300 V DC
- Mechanical Durability:
- 15 Mcycles
- Control Circuit Type:
- AC 50/60 Hz
- Flame Retardance:
- V1 conforming to UL 94
- Range:
- TeSys || TeSys Deca
- Fire Resistance:
- 850°C IEC 60695-2-1
- Rohs Exemption Information:
- Yes
- [Uc] Control Circuit Voltage:
- 24 V AC 50/60 Hz
- Hold-In Power Consumption In Va:
- 7.5-7.5 VA 60 Hz cos phi 0.3 (at 20°C) || 7-7 VA 50 Hz cos phi 0.3 (at 20°C)
- Pollution Degree:
- 3
- Tightening Torque:
- control circuit 1.7 N.m screw clamp terminals flat Ø 6 mm || control circuit 1.7 N.m screw clamp terminals Philips No 2 || power circuit 1.7 N.m screw clamp terminals flat Ø 6 mm || power circuit 1.7 N.m screw clamp terminals Philips No 2 || contro
- [Icw] Rated Short-Time Withstand Current:
- 30 A 40°C - 10 min for power circuit || 61 A 40°C - 1 min for power circuit || 105 A 40°C - 10 s for power circuit || 210 A 40°C - 1 s for power circuit || 100 A - 1 s for Signaling circuit || 120 A - 500 ms for Signaling circuit || 140 A - 100 ms fo
- Utilisation Category:
- AC-1 || AC-3 || AC-3e || AC-4
- Standards:
- CSA C22.2 No 14 || EN 60947-4-1 || EN 60947-5-1 || IEC 60947-4-1 || IEC 60947-5-1 || UL 508 || IEC 60335-1
- Mercury Free:
- Yes
- Width:
- 45 mm
- Toxic Heavy Metal Free:
- Yes
- Range Of Product:
- TeSys Deca
- Auxiliary Contacts Type:
- mechanically linked 1 NO + 1 NC IEC 60947-5-1 || mirror contact 1 NC IEC 60947-4-1
- Connections - Terminals:
- control circuit: screw clamp terminals 2 1-2.5 mm² - cable stiffness: flexible with cable end || control circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: flexible without cable end || control circuit: screw clamp terminals 2 1-4 mm² - c
- Country of Origin:
- France
- [Ie] Rated Operational Current:
- 25 A (at <60°C) at <= 440 V AC AC-1 for power circuit
- Mounting Support:
- plate || rail
- [Ui] Rated Insulation Voltage:
- power circuit 600 V CSA || power circuit 600 V UL || Signaling circuit 690 V IEC 60947-1 || Signaling circuit 600 V CSA || Signaling circuit 600 V UL || power circuit 690 V IEC 60947-4-1
- Electrical Durability:
- 0.8 Mcycles 25 A AC-1 <= 440 V
- Protective Cover:
- with
- Power Dissipation Per Pole:
- 1.56 W AC-1
- Maximum Operating Rate:
- 3600 cyc/h 60°C
- Pvc Free:
- Yes
- Eu Rohs Directive:
- Compliant
- Device Short Name:
- LC1D
- [Uimp] Rated Impulse Withstand Voltage:
- 6 kV IEC 60947
- Permissible Ambient Air Temperature Around The Device:
- -40-60°C || 60-70°C with derating
- Contactor Application:
- resistive load
- Minimum Switching Current:
- 5 mA for Signaling circuit
- Climatic Withstand:
- IACS E10 exposure to damp heat || IEC 60947-1 Annex Q category D exposure to damp heat
- Control Circuit Voltage Limits:
- 0.3...0.6 Uc -40-70°C drop-out AC 50/60 Hz || 0.8...1.1 Uc -40-60°C operational AC 50 Hz || 0.85...1.1 Uc -40-60°C operational AC 60 Hz || 1...1.1 Uc 60-70°C operational AC 50/60 Hz
- Operating Altitude:
- 0...9842.52 ft (0...3000 m)
- Operating Time:
- 4...19 ms opening || 12...22 ms closing
- Irms Rated Making Capacity:
- 140 A AC for Signaling circuit conforming to IEC 60947-5-1 || 250 A DC for Signaling circuit conforming to IEC 60947-5-1 || 250 A at 440 V for power circuit conforming to IEC 60947
- Auxiliary Contact Composition:
- 1 NO + 1 NC
- [Ith] Conventional Free Air Thermal Current:
- 10 A (at 60°C) for Signaling circuit || 25 A (at 60°C) for power circuit
- Ip Degree Of Protection:
- IP20 front face IEC 60529
- Circularity Profile:
- ENVEOLI1501004
