Schneider Electric

Schneider Electric LC1DT40D7 IEC contactor, TeSys Deca, nonreversing, 40A resistive, 4 pole, 4 NO, 42VAC 50/60Hz coil, open style

(No reviews yet) Write a Review

Write a Review

Schneider Electric

Schneider Electric LC1DT40D7 IEC contactor, TeSys Deca, nonreversing, 40A resistive, 4 pole, 4 NO, 42VAC 50/60Hz coil, open style

Rating Required Select Rating 1 star (worst) 2 stars 3 stars (average) 4 stars 5 stars (best)

Name

Email Required

Review Subject Required

Comments Required

SKU:

LC1DT40D7

UPC:

MPN:

LC1DT40D7

Condition:

New

Minimum Switching Current:

5 mA for Signaling circuit

Protective Cover:

with

Poles Description:

4P

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Power Dissipation Per Pole:

3.2 W AC-1

Pvc Free:

Yes

Overvoltage Category:

III

[Icw] Rated Short-Time Withstand Current:

50 A 40°C - 10 min for power circuit || 120 A 40°C - 1 min for power circuit || 240 A 40°C - 10 s for power circuit || 380 A 40°C - 1 s for power circuit || 100 A - 1 s for Signaling circuit || 120 A - 500 ms for Signaling circuit || 140 A - 100 ms f

Fire Resistance:

850°C IEC 60695-2-1

Range:

TeSys || TeSys Deca

Climatic Withstand:

IACS E10 exposure to damp heat || IEC 60947-1 Annex Q category D exposure to damp heat

Pole Contact Composition:

4 NO

Connections - Terminals:

control circuit: screw clamp terminals 2 1-2.5 mm² - cable stiffness: flexible with cable end || control circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: flexible without cable end || control circuit: screw clamp terminals 2 1-4 mm² - c

[Uc] Control Circuit Voltage:

42 V AC 50/60 Hz

Standards:

CSA C22.2 No 14 || EN 60947-4-1 || EN 60947-5-1 || IEC 60947-4-1 || IEC 60947-5-1 || UL 508 || IEC 60335-1

Average Impedance:

2 mOhm - Ith 40 A 50 Hz for power circuit

Signaling Circuit Frequency:

25...400 Hz

Compatibility Code:

LC1D

[Ui] Rated Insulation Voltage:

power circuit 600 V CSA || power circuit 600 V UL || Signaling circuit 690 V IEC 60947-1 || Signaling circuit 600 V CSA || Signaling circuit 600 V UL || power circuit 690 V IEC 60947-4-1

[Uimp] Rated Impulse Withstand Voltage:

6 kV IEC 60947

Coil Technology:

without built-in suppressor module

Non-Overlap Time:

1.5 ms on de-energisation between NC and NO contact || 1.5 ms on energisation between NC and NO contact

[Ie] Rated Operational Current:

40 A (at <60°C) at <= 440 V AC AC-1 for power circuit

Hold-In Power Consumption In Va:

7.5-7.5 VA 60 Hz cos phi 0.3 (at 20°C) || 7-7 VA 50 Hz cos phi 0.3 (at 20°C)

Net Weight:

0.425 kg

Rohs Exemption Information:

Yes

Width:

45 mm

Auxiliary Contact Composition:

1 NO + 1 NC

Insulation Resistance:

> 10 MOhm for Signaling circuit

Associated Fuse Rating:

10 A gG for Signaling circuit conforming to IEC 60947-5-1 || 63 A gG at <= 690 V coordination type 1 for power circuit || 40 A gG at <= 690 V coordination type 2 for power circuit

Electrical Durability:

1.4 Mcycles 40 A AC-1 <= 440 V

Minimum Switching Voltage:

17 V for Signaling circuit

Weight:

0.425 kg

Safety Reliability Level:

B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1

Pollution Degree:

3

Eu Rohs Directive:

Compliant

Maximum Operating Rate:

3600 cyc/h 60°C

Heat Dissipation:

2-3 W at 50/60 Hz

Utilisation Category:

AC-1 || AC-3 || AC-3e || AC-4

Warranty:

18 months

Mechanical Durability:

15 Mcycles

Permissible Ambient Air Temperature Around The Device:

-40-60°C || 60-70°C with derating

Rated Breaking Capacity:

450 A at 440 V for power circuit conforming to IEC 60947

Environmental Disclosure:

ENVPEP110229EN

Device Short Name:

LC1D

Ip Degree Of Protection:

IP20 front face IEC 60529

Circularity Profile:

ENVEOLI110229EN