
Schneider Electric LC1DT80AG7 IEC contactor, TeSys Deca, nonreversing, 80A resistive, 4 pole, 4 NO, 120VAC 50/60Hz coil, open style
Schneider Electric
$540.96
TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has four normally open power contacts. Power contacts have a 80A resistive load rating. Contactor is supplied with a 120 VAC 60 Hz coil. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 4.80 inches tall, 2.76 inches wide and 4.72 inches deep. It weighs 2.54 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
- Country of Origin:
- Indonesia
- Operating Time:
- 4...19 ms opening || 12...26 ms closing
- Range Of Product:
- TeSys Deca
- Minimum Switching Voltage:
- 17 V for Signaling circuit
- Overvoltage Category:
- III
- Rohs Exemption Information:
- Yes
- Mounting Support:
- plate || rail
- Inrush Power In Va:
- 140-140 VA 60 Hz cos phi 0.75 (at 20°C)
- [Ie] Rated Operational Current:
- 80 A (at <60°C) at <= 440 V AC AC-1 for power circuit
- Sustainable Offer Status:
- Green Premium product
- Tightening Torque:
- control circuit 1.7 N.m screw clamp terminals flat Ø 6 mm || control circuit 1.7 N.m screw clamp terminals Philips No 2 || power circuit 8 N.m screw clamp terminals 25-35 mm² hexagonal 4 mm || power circuit 5 N.m screw clamp terminals 1-25 mm² hex
- Height:
- 122 mm
- Rated Breaking Capacity:
- 1000 A at 440 V for power circuit conforming to IEC 60947
- Electrical Durability:
- 1.4 Mcycles 80 A AC-1 <= 440 V
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Operating Altitude:
- 0...9842.52 ft (0...3000 m)
- [Ue] Rated Operational Voltage:
- power circuit <= 690 V AC 25...400 Hz || power circuit <= 300 V DC
- Climatic Withstand:
- IACS E10 exposure to damp heat || IEC 60947-1 Annex Q category D exposure to damp heat
- Ip Degree Of Protection:
- IP20 front face IEC 60529
- Auxiliary Contact Composition:
- 1 NO + 1 NC
- Safety Reliability Level:
- B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
- Pollution Degree:
- 3
- Net Weight:
- 1.15 kg
- Power Dissipation Per Pole:
- 10.2 W AC-1
- Compatibility Code:
- LC1D
- [Ui] Rated Insulation Voltage:
- power circuit 600 V CSA || power circuit 600 V UL || Signaling circuit 690 V IEC 60947-1 || Signaling circuit 600 V CSA || Signaling circuit 600 V UL || power circuit 690 V IEC 60947-4-1
- Coil Technology:
- without built-in suppressor module
- Flame Retardance:
- V1 conforming to UL 94
- Utilisation Category:
- AC-1
- Environmental Disclosure:
- ENVPEP1503009EN
- Circularity Profile:
- ENVEOLI1503009EN
- Protective Cover:
- with
- China Rohs Regulation:
- Pro-active China RoHS declaration (out of China RoHS legal scope)
- Control Circuit Voltage Limits:
- 0.3...0.6 Uc -40-70°C drop-out AC 60 Hz || 0.85...1.1 Uc -40-60°C operational AC 60 Hz || 1...1.1 Uc 60-70°C operational AC 60 Hz
- Mechanical Robustness:
- vibrations contactor open 2 Gn, 5...300 Hz) || vibrations contactor closed 4 Gn, 5...300 Hz) || shocks contactor closed 15 Gn for 11 ms) || shocks contactor open 10 Gn for 11 ms)
- Mercury Free:
- Yes
- Product Or Component Type:
- contactor
- Product Certifications:
- UL || DNV || BV || CCC || CSA || LROS (Lloyds register of shipping) || GL || RINA || GOST
- Protective Treatment:
- THIEC 60068-2-30
- Poles Description:
- 4P
- Hold-In Power Consumption In Va:
- 13-13 VA 60 Hz cos phi 0.3 (at 20°C)
- Depth:
- 120 mm
- Pvc Free:
- Yes
- Device Short Name:
- LC1D
- Reach Regulation:
- Free of Substances of Very High Concern above the threshold
- [Uc] Control Circuit Voltage:
- 120 V AC 60 Hz
- Auxiliary Contacts Type:
- mechanically linked 1 NO + 1 NC IEC 60947-5-1 || mirror contact 1 NC IEC 60947-4-1