Schneider Electric

Schneider Electric LC2D50ABNE TeSys Deca reversing contactor - 3P - <= 440 V - 50 A AC-3 - 24...60 V AC/DC coil

(No reviews yet) Write a Review
SKU:
LC2D50ABNE
MPN:
LC2D50ABNE
Condition:
New
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Maximum Operating Rate:
3600 cyc/h 60°C
Inrush Power In Va:
15-15 VA 50/60 Hz 20°C)
Width:
119 mm
Pollution Degree:
3
Coil Technology:
built-in bidirectional peak limiting
Connections - Terminals:
control circuit screw clamp terminals 1 1-4 mm²flexible without cable end || control circuit screw clamp terminals 2 1-4 mm²flexible without cable end || control circuit screw clamp terminals 1 1-4 mm²flexible with cable end || control circuit scr
[Ue] Rated Operational Voltage:
power circuit 690 V AC 25...400 Hz
Non-Overlap Time:
1.5 ms on de-energisation between NC and NO contact || 1.5 ms on energisation between NC and NO contact
Warranty:
18 months
Protective Cover:
with
Device Presentation:
preassembled with reversing power busbar
Insulation Resistance:
> 10 MOhm for Signaling circuit
[Ui] Rated Insulation Voltage:
power circuit 690 V IEC 60947-4-1 || Signaling circuit 690 V IEC 60947-1
Climatic Withstand:
IACS E10 || IEC 60947-1 Annex Q category D
Ambient Air Temperature For Operation:
-40-60°C || 60-70°C with derating
Utilisation Category:
AC-1 || AC-3
Environmental Disclosure:
ENVPEP1607010EN
Associated Fuse Rating:
10 A gG for Signaling circuit conforming to IEC 60947-5-1 || 100 A gG at <= 690 V coordination type 1 for power circuit || 100 A gG at <= 690 V coordination type 2 for power circuit
Color:
Gray SE GREY 6) || Green SE GREEN 2)
Auxiliary Contacts Type:
mechanically linked 1 NO + 1 NC IEC 60947-5-1 || mirror contact 1 NC IEC 60947-4-1
Poles Description:
3P
Maximum Horse Power Rating:
3 hp at 115 V AC 60 Hz for 1 phase motors || 7.5 hp at 230/240 V AC 60 Hz for 1 phase motors || 15 hp at 200/208 V AC 60 Hz for 3 phase motors || 15 hp at 230/240 V AC 60 Hz for 3 phase motors || 40 hp at 460/480 V AC 60 Hz for 3 phase motors || 40 h
Pole Contact Composition:
3 NO
Mechanical Robustness:
vibrations contactor open2 Gn, 5...300 Hz || vibrations contactor closed4 Gn, 5...300 Hz || shocks contactor open10 Gn for 11 ms || shocks contactor closed15 Gn for 11 ms
Range:
TeSys || TeSys Deca
Minimum Switching Current:
5 mA for Signaling circuit
Ip Degree Of Protection:
IP20 front face IEC 60529
Irms Rated Making Capacity:
140 A AC for Signaling circuit conforming to IEC 60947-5-1 || 250 A DC for Signaling circuit conforming to IEC 60947-5-1 || 900 A at 440 V for power circuit conforming to IEC 60947
Minimum Switching Voltage:
17 V for Signaling circuit
Product Or Component Type:
reversing contactor
Standards:
EN/IEC 60947-4-1 || EN/IEC 60947-5-1 || UL 60947-4-1 || CSA C22.2 No 60947-4-1 || IEC 60335-1
[Ie] Rated Operational Current:
50 A (at <60°C) at <= 440 V AC-3 for power circuit || 80 A (at <60°C) at <= 440 V AC-1 for power circuit
Auxiliary Contact Composition:
1 NO + 1 NC
Operating Time:
55...65 ms closing || 20...120 ms opening >= 17221) || 20...80 ms opening >= 18011)
[Uimp] Rated Impulse Withstand Voltage:
6 kV IEC 60947
Sustainable Offer Status:
Green Premium product
Rohs Exemption Information:
Yes
Rated Breaking Capacity:
900 A at 440 V for power circuit conforming to IEC 60947
Heat Dissipation:
0.7-0.7 W 50/60 Hz
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Motor Power Kw:
15 kW at 220...230 V AC 50 Hz || 22 kW at 380...400 V AC 50 Hz || 25 kW at 415 V AC 50 Hz || 30 kW at 440 V AC 50 Hz || 30 kW at 500 V AC 50 Hz || 33 kW at 660...690 V AC 50 Hz
Circularity Profile:
ENVEOLI1607010EN
Net Weight:
2.164 kg
Safety Reliability Level:
B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
Control Circuit Type:
AC 50/60 Hz AC/DC electronic || DC AC/DC electronic
Device Short Name:
LC2D
Fire Resistance:
850°C IEC 60695-2-1
Average Impedance:
1.5 mOhm - Ith 80 A 50 Hz for power circuit
Tightening Torque:
control circuit 1.7 N.m screw clamp terminals flat Ø 6 mm || control circuit 1.7 N.m screw clamp terminals Philips No 2 || power circuit 8 N.m EverLink BTR screw connectors 25-35 mm² hexagonal 4 mm || power circuit 5 N.m EverLink BTR screw connecto
$347.00

Description

LC2D50ABNE is a 3-pole TeSys D reversing contactor from Schneider Electric for motor applications. Rated 50A AC-3 22kW@400V, it includes a 24-60V AC/DC low consumption electronic coil, 2NO+2NC aux contacts, a mechanical interlock. LC2D50ABNE is a 3-pole TeSys D reversing contactor from Schneider Electric for motor applications up to 22kW@400V. It includes a 24-60V AC/DC low consumption electronic coil and 2NO+2NC built-in auxiliary contacts, NC mirror certified. Compact, DIN-rail mounting, with mechanical interlock and pre-wired reversing circuit, it procures reliability and durability. Available worldwide, it is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). Compact product, 119mm wide, for DIN-rail and panel mounting. Assembled with mechanical interlock and pre-wired reversing circuit. Clear separation between power and control circuits, easy front access to coil and auxiliary contacts connections. Equipped with an electronic coil, wide band voltage 24-60V, AC/DC compatible, low consumption. Provides 4 built-in auxiliary contacts 2NO + 2NC, NC contacts are mirror certified suitable to be included in the control of safety systems. High electrical durability, guaranteed for 1.6 million cycles at 50A AC-3 440V, for demanding motor switching applications. Robust design with high making and breaking capacities up to 20 In. Power connections by EverLink BTR screw terminals providing constant tightening pressure.
View AllClose

Related Products

Related Products