Schneider Electric

Schneider Electric LC2D65AKUE TeSys Deca reversing contactor - 3P - <= 440 V - 65 A AC-3 - 100...250 V AC/DC coil

(No reviews yet) Write a Review
SKU:
LC2D65AKUE
MPN:
LC2D65AKUE
Condition:
New
China Rohs Regulation:
Product out of China RoHS scope. Substance declaration for your information.
Color:
Gray SE GREY 6) || Green SE GREEN 2)
Average Impedance:
1.5 mOhm - Ith 80 A 50 Hz for power circuit
Auxiliary Contact Composition:
1 NO + 1 NC
Protective Treatment:
TH IEC 60068-2-30
Poles Description:
3P
Product Certifications:
CCC || CSA || EAC || UL || KC || DNV-GL || LROS (Lloyds register of shipping) || UKCA
Heat Dissipation:
1.2-1.2 W 50/60 Hz
Overvoltage Category:
III
Power Dissipation Per Pole:
9.6 W AC-1 || 6.3 W AC-3
Width:
119 mm
Product Name:
Tesys Deca green || TeSys Deca
Ip Degree Of Protection:
IP20 front face IEC 60529
Operating Time:
55...65 ms closing || 20...120 ms opening >= 17221) || 20...80 ms opening >= 18011)
[Uc] Control Circuit Voltage:
100...250 V AC 50/60 Hz || 100...250 V DC
Mercury Free:
Yes
Warranty:
18 months
[Ue] Rated Operational Voltage:
power circuit 690 V AC 25...400 Hz
Motor Power Kw:
18.5 kW at 220...230 V AC 50 Hz || 30 kW at 380...400 V AC 50 Hz || 37 kW at 415 V AC 50 Hz || 37 kW at 440 V AC 50 Hz || 37 kW at 500 V AC 50 Hz || 37 kW at 660...690 V AC 50 Hz
Flame Retardance:
V1 conforming to UL 94
Maximum Horse Power Rating:
5 hp at 115 V AC 60 Hz for 1 phase motors || 10 hp at 230/240 V AC 60 Hz for 1 phase motors || 20 hp at 200/208 V AC 60 Hz for 3 phase motors || 20 hp at 230/240 V AC 60 Hz for 3 phase motors || 40 hp at 460/480 V AC 60 Hz for 3 phase motors || 50 hp
Climatic Withstand:
IACS E10 || IEC 60947-1 Annex Q category D
Control Circuit Type:
AC 50/60 Hz AC/DC electronic || DC AC/DC electronic
Associated Fuse Rating:
10 A gG for Signaling circuit conforming to IEC 60947-5-1 || 125 A gG at <= 690 V coordination type 1 for power circuit || 125 A gG at <= 690 V coordination type 2 for power circuit
Range:
TeSys || TeSys Deca
Inrush Power In Va:
18-18 VA 50/60 Hz 20°C)
Hold-In Power Consumption In Va:
1.8-1.8 VA 20°C) 50/60 Hz
[Ui] Rated Insulation Voltage:
power circuit 690 V IEC 60947-4-1 || Signaling circuit 690 V IEC 60947-1
Hold-In Power Consumption In W:
1.2-1.2 W 20°C
Weight:
2.174 kg
Inrush Power In W:
14-14 W 20°C
Non-Overlap Time:
1.5 ms on de-energisation between NC and NO contact || 1.5 ms on energisation between NC and NO contact
Mounting Support:
rail || plate
Connections - Terminals:
control circuit screw clamp terminals 1 1-4 mm²flexible without cable end || control circuit screw clamp terminals 2 1-4 mm²flexible without cable end || control circuit screw clamp terminals 1 1-4 mm²flexible with cable end || control circuit scr
Contactor Application:
motor control || resistive load
Tightening Torque:
control circuit 1.7 N.m screw clamp terminals flat Ø 6 mm || control circuit 1.7 N.m screw clamp terminals Philips No 2 || power circuit 8 N.m EverLink BTR screw connectors 25-35 mm² hexagonal 4 mm || power circuit 5 N.m EverLink BTR screw connecto
Device Short Name:
LC2D
[Ith] Conventional Free Air Thermal Current:
10 A (at 60°C) for Signaling circuit || 80 A (at 60°C) for power circuit
Maximum Operating Rate:
3600 cyc/h 60°C
Operating Altitude:
0...9842.52 ft (0...3000 m)
Reach Regulation:
Reference contains Substances of Very High Concern above the threshold
Protective Cover:
with
Pole Contact Composition:
3 NO
Country of Origin:
France
Minimum Switching Voltage:
17 V for Signaling circuit
Signaling Circuit Frequency:
25...400 Hz
Insulation Resistance:
> 10 MOhm for Signaling circuit
Mechanical Robustness:
vibrations contactor open2 Gn, 5...300 Hz || vibrations contactor closed4 Gn, 5...300 Hz || shocks contactor open10 Gn for 11 ms || shocks contactor closed15 Gn for 11 ms
$366.00

Description

LC2D65AKUE is a 3-pole TeSys D reversing contactor from Schneider Electric for motor applications. Rated 65A AC-3 30kW@400V, it includes a 100-250V AC/DC low consumption electronic coil, 2NO+2NC aux contacts, a mechanical interlock. LC2D65AKUE is a 3-pole TeSys D reversing contactor from Schneider Electric for motor applications up to 30kW@400V. It includes a 100-250V AC/DC low consumption electronic coil and 2NO+2NC built-in auxiliary contacts, NC mirror certified. Compact, DIN-rail mounting, with mechanical interlock and pre-wired reversing circuit, it procures reliability and durability. Available worldwide, it is multi-standards certified (IEC, UL, CSA, CCC, EAC, Marine) and Green Premium compliant (RoHs/Reach). Compact product, 119mm wide, for DIN-rail and panel mounting. Assembled with mechanical interlock and pre-wired reversing circuit. Clear separation between power and control circuits, easy front access to coil and auxiliary contacts connections. Equipped with an electronic coil, wide band voltage 100-250V, AC/DC compatible, low consumption. Provides 4 built-in auxiliary contacts 2NO + 2NC, NC contacts are mirror certified suitable to be included in the control of safety systems. High electrical durability, guaranteed for 1.6 million cycles at 65A AC-3 440V, for demanding motor switching applications. Robust design with high making and breaking capacities up to 20 In. Power connections by EverLink BTR screw terminals providing constant tightening pressure.
View AllClose

Related Products

Related Products