Schneider Electric LC2DT40E7 TeSys Deca changeover contactor - 4P(4 NO) - AC-1 - <= 440 V 40 A - 48 V AC coil
Schneider Electric
$601.56
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric LC2DT40E7 TeSys Deca changeover contactor - 4P(4 NO) - AC-1 - <= 440 V 40 A - 48 V AC coil
TeSys D changeover contactor, 4 poles (4NO), for non-inductive load applications up to 40A/690V AC-1. It provides 24V DC coils, 2NO+2NC built-in auxiliary contacts (NC mirror contacts), connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (90mm width), DIN-rail mounting or screw fixing. With pre-wired changeover power connections, mechanical interlock (without electrical interlocking). Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).
- Contactor Application:
- resistive load
- Hold-In Power Consumption In Va:
- 7.5-7.5 VA 20°C) 0.3 60 Hz || 7-7 VA 20°C) 0.3 50 Hz
- Protective Cover:
- with
- Interlocking Type:
- mechanical
- Product Name:
- TeSys Deca
- Utilisation Category:
- AC-1 || AC-3 || AC-3e || AC-4
- Overvoltage Category:
- III
- Sustainable Offer Status:
- Green Premium product
- Heat Dissipation:
- 2-3 W 50/60 Hz
- Ip Degree Of Protection:
- IP20 front face IEC 60529
- [Icw] Rated Short-Time Withstand Current:
- 50 A 40°C - 10 min for power circuit || 120 A 40°C - 1 min for power circuit || 240 A 40°C - 10 s for power circuit || 380 A 40°C - 1 s for power circuit || 100 A - 1 s for Signaling circuit || 120 A - 500 ms for Signaling circuit || 140 A - 100 ms f
- Ambient Air Temperature For Operation:
- -40-60°C || 60-70°C with derating
- [Ie] Rated Operational Current:
- 40 A (at <60°C) at <= 440 V AC AC-1 for power circuit
- [Uimp] Rated Impulse Withstand Voltage:
- 6 kV IEC 60947
- Safety Reliability Level:
- B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
- Poles Description:
- 4P
- Rated Breaking Capacity:
- 450 A at 440 V for power circuit conforming to IEC 60947
- Coil Technology:
- without built-in suppressor module
- Signaling Circuit Frequency:
- 25...400 Hz
- Ambient Air Temperature For Storage:
- -60-80°C
- China Rohs Regulation:
- Pro-active China RoHS declaration (out of China RoHS legal scope)
- Range:
- TeSys || TeSys Deca
- Average Impedance:
- 2 mOhm - Ith 40 A 50 Hz for power circuit
- Control Circuit Voltage Limits:
- 0.3...0.6 Uc -40-60°C drop-out AC 50/60 Hz || 0.8...1.1 Uc -40-60°C operational AC 50 Hz || 0.85...1.1 Uc -40-60°C operational AC 60 Hz
- Climatic Withstand:
- IACS E10 || IEC 60947-1 Annex Q category D
- Eu Rohs Directive:
- Compliant
- Circularity Profile:
- ENVEOLI110229EN
- Pole Contact Composition:
- 4 NO
- Control Circuit Type:
- AC 50/60 Hz
- Minimum Switching Voltage:
- 17 V for Signaling circuit
- Depth:
- 98 mm
- Electrical Durability:
- 1.4 Mcycles 40 A AC-1 <= 440 V
- Warranty:
- 18 months
- Power Dissipation Per Pole:
- 3.2 W AC-1
- Insulation Resistance:
- > 10 MOhm for Signaling circuit
- Tightening Torque:
- control circuit 1.7 N.m screw clamp terminals flat Ø 6 mm || control circuit 1.7 N.m screw clamp terminals Philips No 2 || power circuit 1.7 N.m connector flat Ø 6 mm || power circuit 1.7 N.m connector Philips No 2 || power circuit 1.7 N.m screw cl
- Standards:
- CSA C22.2 No 14 || EN 60947-4-1 || EN 60947-5-1 || IEC 60947-4-1 || IEC 60947-5-1 || UL 508 || IEC 60335-1
- Operating Time:
- 12...22 ms closing || 4...19 ms opening
- Non-Overlap Time:
- 1.5 ms on de-energisation between NC and NO contact || 1.5 ms on energisation between NC and NO contact
- Mechanical Robustness:
- vibrations contactor open2 Gn, 5...300 Hz || vibrations contactor closed4 Gn, 5...300 Hz || shocks contactor closed15 Gn for 11 ms || shocks contactor open8 Gn for 11 ms
- Maximum Operating Rate:
- 3600 cyc/h 60°C
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Minimum Switching Current:
- 5 mA for Signaling circuit
- Mounting Support:
- rail || plate
- Country of Origin:
- France
- Product Or Component Type:
- changeover contactor
