Schneider Electric

Schneider Electric LC2K0910F7 Reversing contactor, TeSys K, 3P, AC-3, lt or eq to 440V 9A, 1 NO, 110VAC coil

(No reviews yet) Write a Review

Write a Review

Schneider Electric

Schneider Electric LC2K0910F7 Reversing contactor, TeSys K, 3P, AC-3, lt or eq to 440V 9A, 1 NO, 110VAC coil

Rating Required Select Rating 1 star (worst) 2 stars 3 stars (average) 4 stars 5 stars (best)

Name

Email Required

Review Subject Required

Comments Required

SKU:

LC2K0910F7

UPC:

MPN:

LC2K0910F7

Condition:

New

[Uc] Control Circuit Voltage:

110 V AC 50/60 Hz

Device Short Name:

LC2K

Interlocking Type:

mechanical

Maximum Operating Rate:

3600 cyc/h

[Uimp] Rated Impulse Withstand Voltage:

8 kV

Rated Breaking Capacity:

110 A at 220...230 V conforming to IEC 60947 || 110 A at 380...400 V conforming to IEC 60947 || 110 A at 415 V conforming to IEC 60947 || 110 A at 440 V conforming to IEC 60947 || 80 A at 500 V conforming to IEC 60947 || 70 A at 660...690 V conformin

Minimum Switching Voltage:

17 V for Signaling circuit

[Ie] Rated Operational Current:

9 A (at <60°C) at <= 440 V AC AC-3 for power circuit || 9 A (at <60°C) at <= 440 V AC AC-3e for power circuit || 20 A (at <60°C) at <= 690 V AC AC-1 for power circuit

Mechanical Robustness:

shocks contactor closed, on X axis10 Gn for 11 ms IEC 60068-2-27 || shocks contactor closed, on Y axis15 Gn for 11 ms IEC 60068-2-27 || shocks contactor closed, on Z axis15 Gn for 11 ms IEC 60068-2-27 || shocks contactor opened, on X axis6 Gn for 11

Operating Time:

10...20 ms coil energisation and NO closing || 10...20 ms coil de-energisation and NO opening

Connections - Terminals:

screw clamp terminals 1 1.5-4 mm²solid || screw clamp terminals 1 0.75-4 mm²flexible without cable end || screw clamp terminals 1 0.34-2.5 mm²flexible with cable end || screw clamp terminals 2 1.5-4 mm²solid || screw clamp terminals 2 0.75-4

Product Or Component Type:

reversing contactor

Product Certifications:

CB Scheme || CCC || UL || CSA || EAC || CE || UKCA

[Ue] Rated Operational Voltage:

power circuit 690 V AC 50/60 Hz || Signaling circuit <= 690 V AC 50/60 Hz

Hold-In Power Consumption In Va:

4.5-4.5 VA (at 20°C)

Rohs Exemption Information:

Yes

Inrush Power In Va:

30-30 VA (at 20°C)

Net Weight:

0.39 kg

Electrical Durability:

1.3 Mcycles 9 A AC-3 <= 440 V || 1.3 Mcycles 9 A AC-3e <= 440 V || 0.16 Mcycles 20 A AC-1 <= 690 V || 0.02 Mcycles 54 A AC-4 <= 440 V

Operating Altitude:

6561.68 ft (2000 m) without derating

Reach Regulation:

Free of Substances of Very High Concern above the threshold

Product Name:

TeSys K

Eu Rohs Directive:

Compliant

[Ui] Rated Insulation Voltage:

power circuit 600 V UL 508 || power circuit 690 V IEC 60947-4-1 || Signaling circuit 690 V IEC 60947-4-1 || Signaling circuit 690 V IEC 60947-5-1 || Signaling circuit 600 V UL 508 || power circuit 600 V CSA C22.2 No 14 || Signaling circuit 600 V CSA

Ambient Air Temperature For Operation:

-25-50°C

Mercury Free:

Yes

Auxiliary Contact Composition:

1 NO

Range:

TeSys

Environmental Disclosure:

ENVPEP1503003EN

Standards:

EN/IEC 60947-4-1 || GB/T 14048.4 || UL 60947-4-1 || CSA C22.2 No 60947-4-1 || JIS C8201-4-1

[Icw] Rated Short-Time Withstand Current:

90 A 50°C - 1 s for power circuit || 85 A 50°C - 5 s for power circuit || 80 A 50°C - 10 s for power circuit || 60 A 50°C - 30 s for power circuit || 45 A 50°C - 1 min for power circuit || 40 A 50°C - 3 min for power circuit || 20 A 50°C - >= 15 min

Control Circuit Voltage Limits:

operational: 0.8...1.15 Uc (at <50°C) || drop-out: 0.2...0.75 Uc (at <50°C)

Average Impedance:

3 mOhm - Ith 20 A 50 Hz for power circuit

Safety Reliability Level:

B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1

Depth:

57 mm

Signaling Circuit Frequency:

<= 400 Hz

Pole Contact Composition:

3 NO

Warranty:

18 months

Reach Free Of Svhc:

Yes

Utilisation Category:

AC-3 || AC-3e || AC-4 || AC-1

Weight:

0.39 kg

Contactor Application:

resistive load || motor control

Overvoltage Category:

III

Flame Retardance:

V1 conforming to UL 94 || requirement 2 conforming to NF F 16-101 || requirement 2 conforming to NF F 16-102

Heat Dissipation:

1.3-1.3 W