Schneider Electric

Schneider Electric LP1D40008ED IEC contactor, TeSys Deca, nonreversing, 60A resistive, 4 pole, 2 NO and 2 NC, 48VDC coil, open style

(No reviews yet) Write a Review
SKU:
LP1D40008ED
MPN:
LP1D40008ED
Condition:
New
Control Circuit Type:
DC DC standard
Electrical Durability:
1.4 Mcycles 60 A AC-1 <= 440 V
Irms Rated Making Capacity:
800 A at 440 V for power circuit conforming to IEC 60947
Device Short Name:
LP1D
Mounting Support:
rail || plate
Time Constant:
75 ms
Average Impedance:
1.5 mOhm - Ith 60 A 50 Hz for power circuit
[Uimp] Rated Impulse Withstand Voltage:
6 kV IEC 60947
Circularity Profile:
N/A
Maximum Operating Rate:
3600 cyc/h 60°C
Standards:
CSA C22.2 No 14 || EN 60947-4-1 || EN 60947-5-1 || IEC 60947-4-1 || IEC 60947-5-1 || UL 508
Rated Breaking Capacity:
800 A at 440 V for power circuit conforming to IEC 60947
Pvc Free:
Yes
Range Of Product:
TeSys Deca
Hold-In Power Consumption In W:
22-22 W 20°C
Pole Contact Composition:
2 NO + 2 NC
Country of Origin:
Czechia
Rohs Exemption Information:
Yes
Tightening Torque:
power circuit 8 N.m screw clamp terminals 25-35 mm² hexagonal 4 mm || control circuit 1.7 N.m screw clamp terminals flat Ø 6 mm || control circuit 1.7 N.m screw clamp terminals Philips No 2 || power circuit 5 N.m screw clamp terminals 1-25 mm² hex
Permissible Ambient Air Temperature Around The Device:
-40-60°C || 60-70°C with derating
[Ie] Rated Operational Current:
60 A (at <60°C) at <= 440 V AC AC-1 for power circuit
China Rohs Regulation:
Pro-active China RoHS declaration (out of China RoHS legal scope)
Range:
TeSys
Operating Altitude:
0...9842.52 ft (0...3000 m)
Warranty:
18 months
Safety Reliability Level:
B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
Pollution Degree:
3
Protective Cover:
without
Product Certifications:
UL || CSA || CCC || EAC || UKCA || CB || DNV-GL || RINA || BV || LROS (Lloyds register of shipping)
Flame Retardance:
V1 conforming to UL 94
[Uc] Control Circuit Voltage:
48 V DC
[Icw] Rated Short-Time Withstand Current:
72 A 40°C - 10 min for power circuit || 165 A 40°C - 1 min for power circuit || 320 A 40°C - 10 s for power circuit || 720 A 40°C - 1 s for power circuit
Weight:
2.21 kg
Depth:
182 mm
[Ui] Rated Insulation Voltage:
power circuit 690 V IEC 60947-4-1 || power circuit 600 V CSA || power circuit 600 V UL
Environmental Disclosure:
ENVPEP110205EN
Toxic Heavy Metal Free:
Yes
Height:
127 mm
Mechanical Robustness:
shocks contactor open 8 Gn for 11 ms) || shocks contactor closed 10 Gn for 11 ms) || vibrations contactor opened 2 Gn, 5...300 Hz) || vibrations contactor closed 4 Gn, 5...300 Hz)
Poles Description:
4P
Eu Rohs Directive:
Compliant
Inrush Power In W:
22-22 W 20°C)
Width:
85 mm
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
[Ith] Conventional Free Air Thermal Current:
60 A (at 60°C) for power circuit
Associated Fuse Rating:
80 A gG at <= 690 V coordination type 1 for power circuit || 80 A gG at <= 690 V coordination type 2 for power circuit
Mechanical Durability:
10 Mcycles
Utilisation Category:
AC-1
Reach Free Of Svhc:
Yes
$509.00

Description

TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 60A resistive load rating. Contactor is supplied with a 48 VDC coil with transient suppressor module. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 7.17 inches deep. It weighs 4.87 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
View AllClose