Schneider Electric LP1D65008FD IEC contactor, TeSys Deca, nonreversing, 80A resistive, 4 pole, 2 NO and 2 NC, 110VDC coil, open style
Schneider Electric
$719.00
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric LP1D65008FD IEC contactor, TeSys Deca, nonreversing, 80A resistive, 4 pole, 2 NO and 2 NC, 110VDC coil, open style
TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 80A resistive load rating. Contactor is supplied with a 110 VDC coil with transient suppressor module. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 7.17 inches deep. It weighs 4.89 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
- Control Circuit Voltage Limits:
- 0.1...0.3 Uc -40-55°C drop-out DC || 0.85...1.1 Uc -40-55°C operational DC
- Safety Reliability Level:
- B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
- Connections - Terminals:
- power circuit: screw clamp terminals 1 2.5-25 mm² - cable stiffness: flexible without cable end || power circuit: screw clamp terminals 2 2.5-16 mm² - cable stiffness: flexible without cable end || power circuit: screw clamp terminals 1 2.5-25 mm²
- Fire Resistance:
- 850°C IEC 60695-2-1
- Maximum Operating Rate:
- 3600 cyc/h 60°C
- Pole Contact Composition:
- 2 NO + 2 NC
- Toxic Heavy Metal Free:
- Yes
- Coil Technology:
- built-in bidirectional peak limiting diode suppressor
- Device Short Name:
- LP1D
- Mounting Support:
- plate || rail
- Product Certifications:
- UL || CSA || CCC || EAC || UKCA || CB || DNV-GL || RINA || BV || LROS (Lloyds register of shipping)
- Pvc Free:
- Yes
- Time Constant:
- 75 ms
- Power Dissipation Per Pole:
- 9.6 W AC-1
- Mechanical Robustness:
- shocks contactor open 8 Gn for 11 ms) || shocks contactor closed 10 Gn for 11 ms) || vibrations contactor opened 2 Gn, 5...300 Hz) || vibrations contactor closed 3 Gn, 5...300 Hz)
- Average Impedance:
- 1.5 mOhm - Ith 80 A 50 Hz for power circuit
- Operating Time:
- 4...19 ms opening || 12...26 ms closing
- [Ui] Rated Insulation Voltage:
- power circuit 690 V IEC 60947-4-1 || power circuit 600 V CSA || power circuit 600 V UL
- Mechanical Durability:
- 10 Mcycles
- Product Or Component Type:
- contactor
- Mercury Free:
- Yes
- Range:
- TeSys
- [Icw] Rated Short-Time Withstand Current:
- 110 A 40°C - 10 min for power circuit || 260 A 40°C - 1 min for power circuit || 520 A 40°C - 10 s for power circuit || 900 A 40°C - 1 s for power circuit
- Overvoltage Category:
- III
- Permissible Ambient Air Temperature Around The Device:
- -40-60°C || 60-70°C with derating
- Standards:
- CSA C22.2 No 14 || EN 60947-4-1 || EN 60947-5-1 || IEC 60947-4-1 || IEC 60947-5-1 || UL 508
- Weight:
- 2.22 kg
- Range Of Product:
- TeSys Deca
- Ip Degree Of Protection:
- IP20 front face IEC 60529
- Flame Retardance:
- V1 conforming to UL 94
- Operating Altitude:
- 0...9842.52 ft (0...3000 m)
- Protective Cover:
- without
- [Uimp] Rated Impulse Withstand Voltage:
- 6 kV IEC 60947
- Reach Regulation:
- Free of Substances of Very High Concern above the threshold
- Net Weight:
- 2.22 kg
- Warranty:
- 18 months
- Hold-In Power Consumption In W:
- 22-22 W 20°C
- [Ue] Rated Operational Voltage:
- power circuit <= 1000 V AC 25...400 Hz
- Tightening Torque:
- power circuit 8 N.m screw clamp terminals 25-35 mm² hexagonal 4 mm || control circuit 1.7 N.m screw clamp terminals flat Ø 6 mm || control circuit 1.7 N.m screw clamp terminals Philips No 2 || power circuit 5 N.m screw clamp terminals 1-25 mm² hex
- Compatibility Code:
- LP1D
- Reach Free Of Svhc:
- Yes
- Sustainable Offer Status:
- Green Premium product
- Poles Description:
- 4P
- Contactor Application:
- resistive load
- [Ith] Conventional Free Air Thermal Current:
- 80 A (at 60°C) for power circuit
- Country of Origin:
- Czechia
- China Rohs Regulation:
- Pro-active China RoHS declaration (out of China RoHS legal scope)
- Width:
- 85 mm
