Schneider Electric LP1D80008MD IEC contactor, TeSys Deca, nonreversing, 125A resistive, 4 pole, 2 NO and 2 NC, 220VDC coil, open style
Schneider Electric
$599.00
(No reviews yet)
Write a Review
Write a Review
Schneider Electric
Schneider Electric LP1D80008MD IEC contactor, TeSys Deca, nonreversing, 125A resistive, 4 pole, 2 NO and 2 NC, 220VDC coil, open style
TeSys D contactors have been designed for perfect integration into control systems. They can be used to create motor starters for almost any type of application. TeSys D contactors are available in 13 contactor ratings for inductive motor applications up to 150 full-load amps and resistive loads up to 200 amps. This 4 pole IEC contactor can be mounted on DIN rail or mounted directly to a panel. Contactor has two normally open and two normally closed power contacts. Power contacts have a 125A resistive load rating. Contactor is supplied with a 220 VDC coil. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.78 inches wide and 7.72 inches deep. It weighs 6.42 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
- Compatibility Code:
- LP1D
- Country of Origin:
- Czechia
- Associated Fuse Rating:
- 200 A gG at <= 690 V coordination type 1 for power circuit || 160 A gG at <= 690 V coordination type 2 for power circuit
- Depth:
- 196 mm
- Device Short Name:
- LP1D
- Sustainable Offer Status:
- Green Premium product
- Safety Reliability Level:
- B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
- Flame Retardance:
- V1 conforming to UL 94
- Irms Rated Making Capacity:
- 1100 A at 440 V for power circuit conforming to IEC 60947
- Range Of Product:
- TeSys Deca
- Eu Rohs Directive:
- Compliant
- Poles Description:
- 4P
- Pole Contact Composition:
- 2 NO + 2 NC
- [Ie] Rated Operational Current:
- 125 A (at <60°C) at <= 440 V AC AC-1 for power circuit
- Weight:
- 2.91 kg
- Reach Regulation:
- Free of Substances of Very High Concern above the threshold
- Operating Altitude:
- 0...9842.52 ft (0...3000 m)
- Product Or Component Type:
- contactor
- Contactor Application:
- resistive load
- Standards:
- CSA C22.2 No 14 || EN 60947-4-1 || EN 60947-5-1 || IEC 60947-4-1 || IEC 60947-5-1 || UL 508
- Power Dissipation Per Pole:
- 12.5 W AC-1
- Rohs Exemption Information:
- Yes
- [Ith] Conventional Free Air Thermal Current:
- 125 A (at 60°C) for power circuit
- Maximum Operating Rate:
- 3600 cyc/h 60°C
- Rated Breaking Capacity:
- 1100 A at 440 V for power circuit conforming to IEC 60947
- Mercury Free:
- Yes
- Reach Free Of Svhc:
- Yes
- Coil Technology:
- without built-in suppressor module
- Weee:
- The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
- Warranty:
- 18 months
- Tightening Torque:
- control circuit 1.2 N.m screw clamp terminals flat Ø 6 mm || control circuit 1.2 N.m screw clamp terminals Philips No 2 || power circuit 12 N.m connector flat Ø 6 to Ø 8 mm || power circuit 12 N.m connector hexagonal 4 mm || control circuit 1.2 N.
- Range:
- TeSys
- [Uc] Control Circuit Voltage:
- 220 V DC
- Hold-In Power Consumption In W:
- 22-22 W 20°C
- Inrush Power In W:
- 22-22 W 20°C)
- Electrical Durability:
- 0.8 Mcycles 125 A AC-1 <= 440 V
- [Ue] Rated Operational Voltage:
- power circuit <= 690 V AC 25...400 Hz
- Time Constant:
- 75 ms
- Permissible Ambient Air Temperature Around The Device:
- -40-60°C || 60-70°C with derating
- Pvc Free:
- Yes
- Mounting Support:
- rail || plate
- Average Impedance:
- 0.8 mOhm - Ith 125 A 50 Hz for power circuit
- Connections - Terminals:
- control circuit: screw clamp terminals 1 1-4 mm² - cable stiffness: flexible without cable end || control circuit: screw clamp terminals 2 1-4 mm² - cable stiffness: flexible without cable end || control circuit: screw clamp terminals 2 1-2.5 mm²
- Pollution Degree:
- 3
- Mechanical Durability:
- 10 Mcycles
