Schneider Electric LP1K09004GD Contactor, TeSys K, 4P, 4 NO, AC-1, lt or eq to 440V, 20A, 125VDC coil
SKU:
LP1K09004GD
UPC:
MPN:
LP1K09004GD
Condition:
New
Circularity Profile:
ENVEOLI1503003EN
Rated Breaking Capacity:
110 A at 220...230 V conforming to IEC 60947 || 110 A at 380...400 V conforming to IEC 60947 || 110 A at 415 V conforming to IEC 60947 || 110 A at 440 V conforming to IEC 60947 || 80 A at 500 V conforming to IEC 60947 || 70 A at 660...690 V conformin
Utilisation Category:
AC-1
Average Impedance:
3 mOhm - Ith 20 A 50 Hz for power circuit
Poles Description:
4P
Toxic Heavy Metal Free:
Yes
Electrical Durability:
0.16 Mcycles 20 A AC-1 <= 690 V
Height:
58 mm
Range:
TeSys
Country of Origin:
France
Sustainable Offer Status:
Green Premium product
Overvoltage Category:
III
Device Short Name:
LP1K
Irms Rated Making Capacity:
110 A AC for power circuit conforming to IEC 60947
Ambient Air Temperature For Operation:
-25-50°C
Tightening Torque:
0.8-1.3 N.m screw clamp terminals Philips No 2 || 0.8-1.3 N.m screw clamp terminals flat Ø 6 mm || 0.8-1.3 N.m screw clamp terminals pozidriv No 2
[Ui] Rated Insulation Voltage:
power circuit 600 V UL 508 || power circuit 690 V IEC 60947-4-1 || power circuit 600 V CSA C22.2 No 14
TeSys K contactor, 4 poles (4NO), for non-inductive load control applications up to 20A/690V AC-1. It provides a low consumption 24V DC coil with transient suppressor module, without built-in...
TeSys K contactor, 4 poles (4NO), for non-inductive load control applications up to 20A/690V AC-1. It provides a 24V DC coil, without built-in auxiliary contact, connection by solder pins for printed...
TeSys K contactor, 4 poles (4NO), for non-inductive load control applications up to 20A/690V AC-1. It provides a 24V DC coil, without built-in auxiliary contact, connection by screw clamp terminals...