Schneider Electric

Schneider Electric LP5K0910BW3 Reversing contactor, TeSys K, 3P, AC-3, lt or eq to 440V 9A, 1 NO, 24VDC coil

(No reviews yet) Write a Review
SKU:
LP5K0910BW3
MPN:
LP5K0910BW3
Condition:
New
Heat Dissipation:
1.8-1.8 W
[Uc] Control Circuit Voltage:
24 V DC
Pole Contact Composition:
3 NO
Utilisation Category:
AC-1 || AC-4 || AC-3 || AC-3e
Poles Description:
3P
China Rohs Regulation:
Pro-active China RoHS declaration (out of China RoHS legal scope)
Coil Technology:
built-in bidirectional peak limiting diode suppressor
Control Circuit Voltage Limits:
operational: 0.7...1.30 Uc (at <50°C) || drop-out: 0.1...0.7 Uc (at <50°C)
Environmental Disclosure:
ENVPEP1503003EN
Control Circuit Type:
DC low consumption
Product Or Component Type:
reversing contactor
Operating Time:
10...20 ms coil de-energisation and NO opening || 30...40 ms coil energisation and NO closing
Contactor Application:
motor control || resistive load
Interlocking Type:
mechanical
Hold-In Power Consumption In W:
1.8-1.8 W 20°C
Flame Retardance:
V1 conforming to UL 94 || requirement 2 conforming to NF F 16-101 || requirement 2 conforming to NF F 16-102
Overvoltage Category:
III
Mounting Support:
plate || rail
Weee:
The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.
Inrush Power In W:
1.8-1.8 W 20°C)
Electrical Durability:
1.3 Mcycles 9 A AC-3 <= 440 V || 1.3 Mcycles 9 A AC-3e <= 440 V || 0.16 Mcycles 20 A AC-1 <= 690 V || 0.02 Mcycles 54 A AC-4 <= 440 V
Ip Degree Of Protection:
IP20 VDE 0106
Motor Power Kw:
2.2 kW 220...230 V AC 50/60 Hz || 4 kW 380...415 V AC 50/60 Hz || 4 kW 440 V AC 50/60 Hz || 4 kW 480 V AC 50/60 Hz || 4 kW 500...600 V AC 50/60 Hz || 4 kW 660...690 V AC 50/60 Hz
Sustainable Offer Status:
Green Premium product
[Ui] Rated Insulation Voltage:
power circuit 600 V UL 508 || power circuit 690 V IEC 60947-4-1 || Signaling circuit 690 V IEC 60947-4-1 || Signaling circuit 690 V IEC 60947-5-1 || Signaling circuit 600 V UL 508 || power circuit 600 V CSA C22.2 No 14 || Signaling circuit 600 V CSA
Insulation Resistance:
> 10 MOhm for Signaling circuit
Protective Treatment:
TC IEC 60068 || TC DIN 50016
Tightening Torque:
0.8-1.3 N.m screw clamp terminals Philips No 2 || 0.8-1.3 N.m screw clamp terminals flat Ø 6 mm || 0.8-1.3 N.m screw clamp terminals pozidriv No 2
[Icw] Rated Short-Time Withstand Current:
90 A 50°C - 1 s for power circuit || 85 A 50°C - 5 s for power circuit || 80 A 50°C - 10 s for power circuit || 60 A 50°C - 30 s for power circuit || 45 A 50°C - 1 min for power circuit || 40 A 50°C - 3 min for power circuit || 80 A - 1 s for Signali
Auxiliary Contact Composition:
1 NO
Warranty:
18 months
[Ue] Rated Operational Voltage:
power circuit 690 V AC 50/60 Hz || Signaling circuit <= 690 V AC 50/60 Hz
Ambient Air Temperature For Storage:
-50-80°C
Average Impedance:
3 mOhm - Ith 20 A 50 Hz for power circuit
Ambient Air Temperature For Operation:
-25-50°C
Mercury Free:
Yes
Reach Free Of Svhc:
Yes
Standards:
EN/IEC 60947-4-1 || GB/T 14048.4 || UL 60947-4-1 || CSA C22.2 No 60947-4-1 || JIS C8201-4-1
Safety Reliability Level:
B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 || B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
Product Name:
TeSys K
Maximum Operating Rate:
3600 cyc/h
Minimum Switching Voltage:
17 V for Signaling circuit
Mechanical Robustness:
shocks contactor closed, on Z axis15 Gn for 11 ms IEC 60068-2-27 || shocks contactor opened, on Z axis10 Gn for 11 ms IEC 60068-2-27 || vibrations contactor closed4 Gn, 5...300 Hz IEC 60068-2-6 || vibrations contactor opened2 Gn, 5...300 Hz IEC 60068
Range:
TeSys
Associated Fuse Rating:
25 A gG at <= 440 V for power circuit || 25 A aM for power circuit || 10 A gG for Signaling circuit conforming to IEC 60947 || 10 A gG for Signaling circuit conforming to VDE 0660
$238.00

Description

TeSys K reversing contactor, 3 poles (3NO), for motor control applications up to 9A/690V AC-3 (4kW@400V). It provides low consumption 24V DC coils with transient suppressor module, 2NO built-in auxiliary contacts, connection by screw clamp terminals. For operating rates until 600 cycles/hour in AC-3 and environments until 50°C, it procures reliability and durability to standard applications. Compact (90mm width), DIN-rail mounting or screw fixing. With pre-wired reversing power connections, mechanical interlock (without electrical interlocking). Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHS/REACh).
View AllClose

Related Products

Related Products