Schneider Electric

Schneider Electric LTMR08MBD Motor Management, TeSys T, motor controller, Modbus, 6 logic inputs, 3 relay logic outputs, 0.4 to 8A, 24VDC

SKU:

LTMR08MBD

UPC:

MPN:

LTMR08MBD

Condition:

New

Circularity Profile:

ENVEOLI100411EN_V2

Measurement Accuracy:

5...15 % earth fault current internal measurement || 1 % voltage 100...830 V) || 3 % power factor || 5 % earth fault current external measurement || +/- 30 min/year internal clock || 0,02 Temperature || 1 % current || 5 % active and reactive power

Load Current:

5 A 250 V AC logic output || 5 A 30 V DC logic output

Maximum Operating Rate:

1800 cyc/h

Pollution Degree:

3

Standards:

IACS E10 || EN 60947-4-1 || UL 508 || CSA C22.2 No 14 || IEC 60947-4-1

Protective Treatment:

12 x 24 hour cycles EN/IEC 60068-2-30 || 48 h EN/IEC 60070-2-11 || TH EN/IEC 60068

Permissible Power:

480 VA AC-15), Ie = 2 A, 500000 cycles output) || 30 W DC-13), Ie = 1.25 A, 500000 cycles output)

Pvc Free:

Yes

Ip Degree Of Protection:

IP20

Weee:

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins.

Contacts Type And Composition:

1 NO + 1 NC fault signal || 3 NO

Short-Circuit Withstand:

100 kA conforming to EN/IEC 60947-4-1

Product Name:

TeSys T

Eu Rohs Directive:

Compliant with Exemptions

Fire Resistance:

650°C EN/IEC 60695-2-12 || 960°C UL 94

Electromagnetic Compatibility:

electrostatic discharge, 3, 8 kV air, 6 kV contact, conforming to EN/IEC 61000-4-2 || control circuit: surges (common mode), 1 kV, conforming to EN/IEC 61000-4-5 || communication: surges (common mode), 2 kV, conforming to EN/IEC 61000-4-5 || relay ou

Supply Voltage Limits:

20.4-26.24 V DC

Logic Input Number:

6

Connection Pitch:

5.08 mm

Sustainable Offer Status:

Green Premium product

Current State 1 Guaranteed:

logic input < 15 V 2...15 mA 15 ms

Net Weight:

0.53 kg

Current State 0 Guaranteed:

logic input < 5 V <= 15 mA 5 ms

Device Application:

equipment monitoring and control

Overvoltage Category:

III

Network And Machine Diagnosis Type:

running hours counter/operating time || trip history information || phase fault and earth fault trip counters || fault recording || waiting time after overload tripping || remaining operating time before overload tripping || trip context information

China Rohs Regulation:

Product out of China RoHS scope. Substance declaration for your information.

Halogen Content Performance:

Halogen free plastic parts product

Connections - Terminals:

control circuit connector 1 0.25-2.5 mm² AWG 24...AWG 14)flexible with cable end || control circuit connector 1 0.2-2.5 mm² AWG 24...AWG 14)flexible without cable end || control circuit connector 1 0.25-2.5 mm² AWG 24...AWG 14)flexible without cab

Product Or Component Type:

motor controller

Input Current:

7 mA

Rohs Exemption Information:

Yes

[Us] Rated Supply Voltage:

24 V DC

Depth:

122.5 mm

Range:

TeSys

Bus Type:

Modbus 2-wire RS 485 1...247 1.2...19.2 kbit/s, RJ45 2 shielded twisted pairs || Modbus 2-wire RS 485 1...247 1.2...19.2 kbit/s, terminal block 2 shielded twisted pairs

Communication Port Protocol:

Modbus

Protection Type:

phase unbalance || locked rotor || power factor variation || load fluctuation || overload || overload (long time) || phase failure || thermal protection || thermal overload protection || earth-leakage protection || reverse polarity protection

Compatibility Code:

LTMR

Current Consumption:

56...127 mA

[Uimp] Rated Impulse Withstand Voltage:

6 kV current or voltage measurement circuit EN/IEC 60947-4-1 || 0.8 kV communication circuit EN/IEC 60947-4-1 || 0.8 kV supply, inputs and outputs EN/IEC 60947-4-1

Metering Type:

average current Iavg || earth-fault current || phase current I1, I2, I3 RMS || imbalance current || temperature

Maximum Operating Frequency:

2 Hz

[Ui] Rated Insulation Voltage:

690 V EN/IEC 60947-1 || 690 V CSA C22.2 No 14 || 690 V UL 508

Operating Altitude:

<= 6561.68 ft (2000 m) without derating