Schneider Electric

Schneider Electric LTMR100EBD Motor controller, TeSys T, Motor Management, Ethernet/IP, Modbus/TCP, 6 logic inputs, 3 logic outputs, 5 to 100A, 24VDC

(No reviews yet) Write a Review

Write a Review

Schneider Electric

Schneider Electric LTMR100EBD Motor controller, TeSys T, Motor Management, Ethernet/IP, Modbus/TCP, 6 logic inputs, 3 logic outputs, 5 to 100A, 24VDC

Rating Required Select Rating 1 star (worst) 2 stars 3 stars (average) 4 stars 5 stars (best)

Name

Email Required

Review Subject Required

Comments Required

SKU:

LTMR100EBD

UPC:

MPN:

LTMR100EBD

Condition:

New

Standards:

IEC 60947-4-1 || UL 508 || IACS E10 || EN 60947-4-1 || CSA C22.2 No 14

Reach Regulation:

Reference contains Substances of Very High Concern above the threshold

Halogen Content Performance:

Halogen free plastic parts product

Depth:

122.5 mm

Short-Circuit Withstand:

100 kA conforming to EN/IEC 60947-4-1

Contacts Type And Composition:

1 NO + 1 NC fault signal || 3 NO

Web Services:

web server

Bus Type:

Ethernet IEEE 802.3 0...159 10...100 Mbit/s, RJ45 2 shielded twisted pairs

Ambient Air Temperature For Operation:

-20-60°C

China Rohs Regulation:

Product out of China RoHS scope. Substance declaration for your information.

Connections - Terminals:

control circuit connector 1 0.25-2.5 mm² AWG 24...AWG 14)flexible with cable end || control circuit connector 1 0.2-2.5 mm² AWG 24...AWG 14)flexible without cable end || control circuit connector 1 0.25-2.5 mm² AWG 24...AWG 14)flexible without cab

Electromagnetic Compatibility:

electrostatic discharge, 3, 8 kV air, 6 kV contact, conforming to EN/IEC 61000-4-2 || control circuit: surges (common mode), 1 kV, conforming to EN/IEC 61000-4-5 || communication: surges (common mode), 2 kV, conforming to EN/IEC 61000-4-5 || relay ou

Device Application:

equipment monitoring and control

Communication Port Protocol:

Modbus TCP/EtherNet/IP

Rohs Exemption Information:

Yes

Measurement Current:

5-100 A

Product Name:

TeSys T

Environmental Disclosure:

ENVPEP060308EN_V2

Current State 1 Guaranteed:

logic input < 15 V 2...15 mA 15 ms

[Us] Rated Supply Voltage:

24 V DC

Ip Degree Of Protection:

IP20

Operating Altitude:

<= 6561.68 ft (2000 m) without derating

Net Weight:

0.53 kg

[Ui] Rated Insulation Voltage:

690 V EN/IEC 60947-1 || 690 V CSA C22.2 No 14 || 690 V UL 508

Supply Voltage Limits:

20.4-26.24 V DC

[Uimp] Rated Impulse Withstand Voltage:

6 kV current or voltage measurement circuit EN/IEC 60947-4-1 || 0.8 kV communication circuit EN/IEC 60947-4-1 || 0.8 kV supply, inputs and outputs EN/IEC 60947-4-1

Protection Type:

locked rotor || overload || thermal overload protection || earth-leakage protection || reverse polarity protection || overload (long time) || power factor variation || phase unbalance || load fluctuation || phase failure || thermal protection

Ambient Air Temperature For Storage:

-40-80°C

Measurement Accuracy:

5...15 % earth fault current internal measurement || 1 % voltage 100...830 V) || 3 % power factor || 5 % earth fault current external measurement || +/- 30 min/year internal clock || 0,02 Temperature || 5 % active and reactive power || 0,02 current

Permissible Power:

480 VA AC-15), Ie = 2 A, 500000 cycles output) || 30 W DC-13), Ie = 1.25 A, 500000 cycles output)

Maximum Operating Rate:

1800 cyc/h

Mercury Free:

Yes

Tightening Torque:

control circuit 0.5-0.6 N.m flat 3 mm

Overvoltage Category:

III

Current State 0 Guaranteed:

logic input < 5 V <= 15 mA 5 ms

Load Current:

5 A 250 V AC logic output || 5 A 30 V DC logic output

Metering Type:

average current Iavg || earth-fault current || temperature || phase current I1, I2, I3 RMS || imbalance current

Country of Origin:

China

Mechanical Robustness:

vibrations mounted on symmetrical rail1 Gn, 5...300 Hz EN/IEC 60068-2-6 || vibrations plate mounted4 Gn, 5...300 Hz EN/IEC 60068-2-6 || shocks half sine wave acceleration15 Gn for 11 ms EN/IEC 60068-2-27

Maximum Operating Frequency:

2 Hz

Associated Fuse Rating:

4 A gG output || 0.5 A gG control circuit

Compatibility Code:

LTMR

Eu Rohs Directive:

Compliant with Exemptions

Weight:

0.53 kg

Network And Machine Diagnosis Type:

fault recording || trip context information || waiting time after overload tripping || trip history information || running hours counter/operating time || motor control command recording || starting current and time || phase fault and earth fault tri

Input Current:

7 mA